Chapter 3. Connecting devices to the projector
This chapter provides information on connecting devices to the C500 projector.
Connecting devices
Computers and video devices can be connected to the projector at the same time. Check the user’s manual of the connecting device to confirm that it has the appropriate output connector.
A B C D E F
|
| RGB IN |
| RGB OUT | USB | ||
| Y PB/CS | PR/CR | VIDEO IN | AUDIO OUT |
| ||
| COMPONENT VIDEO IN |
| |||||
|
|
|
|
|
| ||
| K |
| J | I | H | G |
|
Connect the supplied | |||||||
RGB in | Connect a VGA cable (not supplied) from a computer | ||||||
RGB out | Connect a VGA cable (not supplied) to a monitor |
| |||||
Reserved for installation control and firmware updates | |||||||
USB | Connect the supplied USB cable from a computer |
| |||||
Connect an audio cable (not supplied) from the computer’s | |||||||
Audio |
|
|
|
| |||
Connect the audio cable (not supplied) from an audio input device | |||||||
Video | Connect the supplied composite video cable from a video device | ||||||
Connect the supplied | |||||||
Component video in | Connect a component video cable (not supplied) from a video device |
Attention: As a safety precaution, disconnect all power to the projector and devices before making connections.
© Lenovo 2006. Portions © IBM Corp. 2005. |