Lenovo C500 manual Description Default

The following table shows the options that you will see in the Setup menu and the default.

Item	Description	Default
Video Type	Press the left or right cursor button to select a	Auto
	video type. Range: Auto - NTSC - PAL - SECAM
Video AGC	Press the left or right cursor button to enable or	On
	disable the automatic gain control for the video
	source. Range: On - Off
Projection	Press the left or right cursor button to select a	Desktop Front
	different projection type. Range: Desktop
	mount-front of screen, desktop mount-rear of
	screen, ceiling mount-front of screen, ceiling
	mount-rear of screen
Frequency	Press the left or right cursor button to adjust the	Auto-detected
	A/D sampling clock. Range: 0 - 180 degrees
Tracking	Press left or right cursor button to adjust the	Auto-detected
	sampling number. Range: 0 - 100
Digital Zoom	Digital operation for zoom and pan adjustment.	n/a
	Press Enter. The Zoom menu appears.
	Press the up cursor button to zoom in. Press the
	down cursor button to zoom out. Press Enter to
	open the Pan menu. (You must zoom in before
	you can enter the Pan menu.)
	Use the cursor buttons to pan to the zoomed
	image. Press the Menu button to exit.
Control	Press the left or right cursor button to select	RS-232C
	remote control method. Range: RS-232C - RJ-45
Network Setting	Press the Enter button to adjust network settings	n/a
	for the projector.

Chapter 5. On-screen Display menu controls 5-9