Appendix A. Maintenance
This chapter provides information on projector maintenance.
Cleaning the lens
To clean the lens, complete the following procedure:
1.Apply a
Note: Avoid using an excessive amount of cleaner, and do not apply the cleaner directly to the lens. Abrasive cleaners, solvents or other harsh chemicals might scratch the lens.
2.Lightly wipe the cleaning cloth over the lens in a circular motion. If you do not intend to use the projector immediately, replace the lens cap.
Replacing the projector lamp
The projector lamp should only be replaced with an Lenovo certified replacement part, which you can order from your business partner or go to www.Lenovo.com/support.
Turn off and unplug the projector at least an hour before replacing the lamp to avoid burns.
Attention: This product contains a Metal Arc Lamp, which contains Mercury. Dispose of it as required by local ordinances and regulations.
The USA restricts or prohibits the disposal of some or all lamps containing mercury in the municipal waste stream. Please visit www.lamprecycle.org for more information on specific state disposal requirements and recycling facilities.
For users in Connecticut and Rhode Island, please call Northeast Lamp Recycling
To replace the projector lamp, complete the following procedure:
1.Loosen the captive screw on the lamp compartment cover.
2.Remove the lamp compartment cover.
© Lenovo 2006. Portions © IBM Corp. 2005. |