
Item | Description |
|
|
Video Information | Displays the resolution and refresh rate of |
| the connected video device. |
|
|
Software Version | Displays information about the firmware |
| version information. |
|
|
Lamp Hours | Displays lamp hours used information. |
|
|
ID | Displays ID information |
|
|
Wireless Settings | Displays Wireless Settings information. For |
| more information, go to ″Projector Wireless |
| Configuration.″ |
|
|
Lamp Mode | Toggles between Normal and ECO lamp |
| modes. ECO mode uses less power but |
| decreases the lamp brightness. |
|
|
Lamp Hour Reset | Reset this item after replacing the lamp. |
| For more information, refer to “Replacing |
| the projector lamp” on page |
|
|
Cancel | Resets Lamp Mode to the default setting. |
|
|
Projector wireless configuration
You can configure a wireless projector with OSD menu. C400 wireless OSD menu also includes some special items such as Showing Projector’s ID Number, Connecting Reset, Wireless Repair, USB Image Display, Stop USB Image Display, Enable WEP, Disable WEP, Refresh Session Key and Showing Session Key.
Item | Description |
|
|
Connection Reset | Disconnects any existing current wireless |
| projecting session. |
|
|
USB image display | To allow the display of images from a USB |
| memory key. |
|
|
Stop USB image display | To stop USB image display. |
|
|