Lenovo C400 manual Enable WEP, Disable WEP, Refresh Session Key, Wireless Repair

Item	Description
Enable WEP	To enable WEP encryption when WEP is
	disabled. When it is selected, the prompt
	″This will disconnect current wireless
	projecting session.″ The new setting will take
	effect in 10 seconds. Continue?″ will appear.
	If select ″Yes″, any existing wireless
	projecting session or USB image display will
	be terminated immediately. When the
	projector is WEP-enabled, the session key
	will be shown at the bottom right corner of
	the projection screen display, you must input
	the new session key while starting a wireless
	projecting or retrieving the status of the
	projector.
Disable WEP	To disable WEP encryption when WEP is
	enabled. When it is selected, the prompt
	″This will disconnect current wireless
	projecting session.″ The new setting will take
	effect in 10 seconds. Continue?″ will appear.
	If select ″Yes″, any exisiting wireless
	projecting session or USB image display will
	be terminated immediately. When the
	projector is WEP-disabled and there is no
	session key shown at the bottom right
	corner of the projection screen display, you
	can start a wireless projecting or retrieve the
	status of the projector without any session
	key.
Refresh Session Key	Replaces the Session key with a new
Note: This option will only be available if	random session key. When it is selected, the
WEP is enabled.	prompt ″This will disconnect current
	wireless projecting session.″ The new setting
	will take effect in 10 seconds. Continue?″
	will appear. If select ″Yes″, any exisiting
	wireless projecting session or USB image
	display will be terminated immediately.
	When the session key is changed the input
	is shown at the bottom right corner of the
	projection screen display. You must input the
	new session key while starting a wireless
	projecting or retrieving the status of the
	projector.
Wireless Repair	When this is selected, the prompt ″This will
	restart the wireless Card. The new setting
	will take effect in 40 seconds. Continue?″
	will appear. If select ″Yes″, any existing
	wireless projecting session or USB image
	display will be terminated immediately.
Session Key	Shows the current session key. It is visible
	only when WEP is enabled. The session key
	will be updated when you enable WEP,
	refresh Session Key, select wireless repair or
	power on.

Chapter 7. 1On-Screen Display menu controls 7-9