Table
Problem | Solution |
|
|
The projector does not respond to | v Direct the remote control towards the remote sensor |
the remote control. | on the projector. |
| |
| v Ensure the path between remote and sensor is not |
| obstructed. |
| v Turn off any fluorescent lights in the room. |
| v Check the battery orientation. |
| v Replace the batteries. |
| v Turn off other |
| vicinity. |
| v Have the remote control serviced. |
There is no sound. | v Adjust the volume on the remote control. |
| v Adjust the volume of the audio source. |
| v Check the audio cable connection. |
| v Test the source audio output with other speakers. |
| v Have the projector serviced. |
The sound is distorted. | v Check the audio cable connection. |
| v Test the source audio output with other speakers. |
| v Have the projector serviced. |
Projector LEDs
The LED on top of the projector indicates the state of the projector and can help you troubleshoot. There are
Table
|
| Explanation |
|
|
|
Flashing |
| Ready- do not press the power button. |
|
|
|
1 |
| Front cover fan error |
|
|
|
2 |
| Lamp fan error |
|
|
|
3 |
| Power board fan error |
|
|
|
4 |
| Blower fan error |
|
|
|
5 |
| Ballast fan error |
|
|
|
Table |
| |
|
| |
Power LED number of flashes |
| Explanation |
|
|
|
3 |
| System overheating |
|
|
|
4 |
| System interface error |
|
|
|
5 |
| Lamp error |
|
|
|
6 |
| Fan error. Refer to |
|
| which fan. |
|
|
|
7 |
| Lamp cover open |
|
|
|
8 |
| DLP driver error. |
|
|
|
Appendix A. Troubleshooting