Lenovo 8095, 8426, 8421, 8145, 8142, 8420, 8141, 8096 manual Installing adapters, What to do next

Page 30

5.Position the memory module over the memory connector. Make sure that the notch 1on the memory module aligns correctly with the connector key2 on the system board. Push the memory module straight down into the memory connector until the retaining clips close.

What to do next:

vTo work with another option, go to the appropriate section.

vTo complete the installation, go to “Replacing the cover and connecting the cables” on page 23.

Installing adapters

This section provides information and instructions for installing and removing adapters. Your computer has two expansion connectors for PCI adapters, one PCI Express (x1) adapter connector, and one PCI Express (x16) graphics adapter connector. You can install an adapter up to 340 mm (13.4 inches) long in PCI adapter connector 1 and PCI adapter connector 2.

To install an adapter:

1.Remove the computer cover. See “Removing the cover” on page 10.

2.Pivot the drive bay assembly upward to gain access to the system board.

14User Guide

Image 30

Contents User Guide Types 8095, 8096, 8141 Types 8145, 8420, 8421 Page User Guide Types 8095, 8096, 8141 Types 8145, 8420, 8421 Page Contents Iv User Guide Important safety information Conditions that require immediate actionGeneral safety guidelines ServicePower cords and power adapters Extension cords and related devicesPlugs and outlets BatteriesCD and DVD drive safety Heat and product ventilationAdditional safety information Lithium battery noticeTo connect To disconnect Modem safety information Laser compliance statementPower supply statement Overview Information resourcesXiv User Guide Installing options FeaturesMemory Operating systems, preinstalled varies by model type Specifications Available options Tools requiredHandling static-sensitive devices Installing external options Locating the connectors on the front of your computer Locating the connectors on the rear of your computer Connector Description Obtaining device driversRemoving the cover Locating components Identifying parts on the system boardInstalling memory Installing options Installing adapters What to do nextWhat to do next Installing internal drives Drive specificationsInstalling a drive User Guide Connecting the first optical drive Installing security features Connecting a serial ATA hard disk drivePassword protection Changing the batteryPadlock loop User Guide Erasing a lost or forgotten password clearing Cmos Replacing the cover and connecting the cablesUser Guide Viewing and changing settings Using the Setup Utility programStarting the Setup Utility program Using passwordsIDE Drive User Password User passwordAdministrator password IDE Drive Master PasswordSetting, changing, and deleting a password Using Security Profile by DeviceSelecting a startup device Exiting from the Setup Utility program Selecting a temporary startup deviceChanging the startup sequence Appendix A. Updating system programs Updating flashing Bios from a disketteUpdating flashing Bios from your operating system System programsRecovering from a POST/BIOS update failure Click Continue Click Downloads and driversAppendix B. Cleaning the mouse Cleaning an optical mouseCleaning a mouse with a ball User Guide Appendix C. Manual modem commands Basic AT commandsSet Tone Dial as default Low speaker volumeSet Pulse dial as default Internal speaker on until carrier detectedExtended AT commands MNP/V.42/V.42bis/V.44 commands Fax Class 1 commands Fax Class 2 commandsVoice commands Appendix C. Manual modem commands User Guide Appendix D. Notices Television output notice TrademarksIndex Page Page Part Number 19R0462