![](/images/new-backgrounds/1102836/10283681x1.webp)
Chapter 2. Using the Setup Utility program
The Setup Utility program is stored in the electrically erasable programmable
Starting the Setup Utility program
To start the Setup Utility program, do the following:
1.If your computer is already on when you start this procedure, shut down the operating system and turn off the computer.
2.Press and hold the F1 key then turn on the computer. When you hear the multiple beeps, release the F1 key.
Notes:
a.If you are using a USB keyboard and the Setup Utility program does not display using this method, press and release the F1 key repeatedly rather than leaving it pressed when turning on the computer.
b.If a user password or an administrator password has been set, the Setup Utility program menu is not displayed until you type your password. See “Using passwords” for more information.
The Setup Utility might start automatically when POST detects that hardware has been removed or new hardware has been installed in your computer.
Viewing and changing settings
The Setup Utility program menu lists items that identify system configuration topics.
When working with the Setup Utility program menu, you must use the keyboard. The keys used to perform various tasks are displayed at the bottom of each screen.
Using passwords
By using the Setup Utility program, you can set passwords to prevent unauthorized persons from gaining access to your computer and data. The following types of passwords are available:
vUser Password
vAdministrator Password
vIDE Drive User Password
vIDE Drive Master Password
You do not have to set any passwords to use your computer. However, if you decide to set any passwords, read the following sections.
Password considerations
If you are setting any of the various types of passwords on your computer, you should read and understand the following information:
© Lenovo 2005. Portions © IBM Corp. 2004,2005. | 25 |