PROGRAMMING

*”CHANGE” - CORRECT CHANGE ONLY CONTROL ROUTINE

This function is used to allow consumer overpay, set a correct change value, and set an unconditional acceptance value.

Press key number 4 will enter “CONOVER#”.

“CONOVERX” - Allow Consumer Overpay

This function allows the vender to vend with the risk of not being able to return the full amount of change. This function has to be turned on to be able to allow consumer overpay.

Press key number 4 and display will show “CONOVER#”, where “#” is flashing. CONOVER1 will allow consumer overpay (customer could potentially be shortchanged) and “CONOVER0” will not allow consumer overpay (will not allow customer to be shortchanged). Press key number 2 or 3 to scroll between CONOVER0 and CONOVER1.

Press key number 4 with the display blinking the setting you wish to use. Display will return to “CONOVER#”.

Press key number 2 to scroll to “CORR CHG”.

“CORR CHG” - Correct Change Value

This is the function that the control board will use to set a value which will turn on the correct change indicator. Note: If “ACCEPT” is set, the “CORR CHG” should be equal to or less than the “ACCEPT”. Note: If the value set is 00.00, the correct change indicator will never come on.

If the controller determines that it cannot return the exact amount of the correct change value or any value less than it, then the indicator will be turned on.

Press key number 4 and the display will show “##.##’. Press key number 2 or 3 to scroll from 00.00 to 99.99.

Press key number 4 with the display showing the value you wish to use. Display will return to “CORR CHG”

Press key number 2 to scroll to “ACCEPT”.

“ACCEPT” - Unconditional Acceptance Value

This is the function that the control board will use to set the largest value of any single form or currency (coin or bill) that can be accepted without having enough change to pay back the full amount.

Press key number 4 and the display will show “##.##”. Press key number 2 or 3 to scroll from 00.00 to 99.95.

Press key number 4 with the display showing the value you wish to use. Display will return to “ACCEPT”. Press key number 1 to return to “CHANGE”.

Press key number 2 to scroll to next routine.

*”PREVIEW” - PREVIEW DATA PASSWORD ROUTINE

This function is used to enable viewing of cash collected, product sales, and error codes without opening the door. To view the data the 4 digit password (4-2-3-1) must be entered. Once entered the “CASH”, “SALES”, “ERROR”, and “RETURN” menus are available from the front of the vender. To view, follow instructions for cash counter routine, sales counter routines, error routine and return.

To change “PREVIEW” password:

At “PREVIEW” press key number 4, “####” (representing current four digit password) will show on display with the far left digit blinking. Press key number 2 to scroll to number desired for password. Press key number 4. The next digit will start blinking, press key number 2 to scroll to number desired for password. Press key number 4. Continue this process until all 4 digits are set. Then press key number 4 and the display will return to “PREVIEW” and the new password has been saved. Pressing key number 1 at anytime during this routine will return to “PREVIEW” with no changes to password occurring.

Press key number 2 to scroll to next routine.

16 of 90

Page 16
Image 16
Maytag DN3000 Change Correct Change only Control Routine, Conoverx Allow Consumer Overpay, Corr CHG Correct Change Value

DN5000, DN3000 specifications

The Maytag DN3000 and DN5000 are two robust commercial dishwashers designed to handle the rigorous demands of busy kitchens, making them ideal for restaurants, hotels, and catering operations. What sets these models apart is their combination of efficiency, performance, and durability, which are essential for maintaining high standards of cleanliness and sanitation.

Both the DN3000 and DN5000 feature an advanced wash system that ensures thorough cleaning of dishes, pots, pans, and utensils. The powerful wash pumps are designed to deliver optimal spray coverage, while the stainless steel construction enhances durability and corrosion resistance. This translates into longer-lasting equipment that can withstand the wear and tear of a high-volume environment.

In terms of capacity, the DN3000 can handle up to 300 racks per hour, while the DN5000 steps up the game with a capacity of 500 racks per hour. This makes the DN5000 particularly suited for establishments with heavy dishwashing loads, where speed and efficiency are paramount. Both models are equipped with a built-in booster heater that ensures optimal water temperatures for effective sanitization, which is critical for health and safety compliance.

User-friendly controls are another highlight of these dishwashers. The intuitive digital display allows operators to easily select wash cycles, monitor cycle progress, and troubleshoot issues. Additionally, both models feature automatic drain systems that help prevent clogs and reduce maintenance interruptions.

Energy and water efficiency are also key characteristics of the Maytag DN3000 and DN5000. These dishwashers are designed to minimize water consumption, making them environmentally friendly options that can help lower operational costs. With their ENERGY STAR certification, they meet energy-efficiency guidelines set by the U.S. Environmental Protection Agency.

Both models also come with customizable rack options to maximize washing effectiveness for various types of dishware, from flat dishes to larger pots and pans. Safety features like lockable controls and built-in safety interlocks further enhance operability, providing peace of mind for kitchen staff.

In summary, the Maytag DN3000 and DN5000 dishwashers are engineered for optimal performance in the fast-paced commercial kitchen setting. With their impressive capacity, advanced wash technology, user-friendly controls, and energy efficiency, these models are reliable choices for any food service operation looking to maintain high standards of cleanliness and efficiency.