PROGRAMMING

“VENDMECH” - Vend Mechanism Summary Errors Press key number 4 and the display will show the following:

- “COLJAM#”, where # is the column number detected jammed.

Press key number 1 will return to “VENDMECH” if all vend mech errors have not been cleared.

If all vend mech errors have been cleared the next error mode will be displayed, or “NONE” if there are no errors.

Press key number 1 will return to “ERROR”.

“CONTROL” - Control System Summary Errors

Press key number 4 and the display will show one of the following:

-“DOORSWIT”, indicating a door switch in the open position for more than 1 hour.

-“RAM ERR”, indicating the check sum for service mode settings memory has been corrupted.

-“AC LOW”, indicating AC supply to the machine has fallen more than 15% below normal line voltage for more than 30 seconds.

-“SCALEER”, indicating a peripheral has introduced a scaling factor that is incompatible with current setting.

Press key number 1 will return to “CONTROL” if all control system errors have not been cleared.

If all control system errors have been cleared the next error code will be displayed, or “NONE” if there are no errors.

Press key number 1 will return to “ERROR”.

“SELECTSW” - Select Switch Summary Errors

Press key number 4 and the display will show “SELSW#”, indicating a key on the keypad has been active for more than 15 seconds while in normal (sales) mode.

Press key number 1 will return to “SELECTSW” if all selection errors have not been cleared.

If all selection errors have been cleared the next error code will be displayed or “NONE” if there are no errors.

Press key number 1 will return to “ERROR”.

“CHANGER” - Changer Summary Errors

Press key number 4 and the display will show one of the following:

-“COINCOMM”, indicating a changer communication error. (No communication for more than 2 seconds)

-“TUBESENS”, indicating a tube sensor error.

-“COININLE”, indicating an inlet chute blocked error (no coins sensed in acceptor for 96 hours).

-“TUBJAM #”, indicating a tube jam error.

-“COIN ROM”, indicating a changer ROM check sum error (failed changer).

-“EXCESSES”, indicating excessive escrow attempts (more than 255 since last coin sensed).

-“COIN JAM”, indicating a coin jam reported by coin mech.

-“LOW ACCP”, indicating a low coin acceptance rate (less than 80%).

-“ACCDISCN”, indicating an acceptor is unplugged.

-“ROUTING”, indicating a coin was mis-routed.

Press key number 1 will return to “CHANGER” if all changer errors have not been cleared.

If all changer errors have been cleared the next error code will be displayed or “NONE” if there are no errors.

Press key number 1 will return to “ERROR”.

8 of 90

Page 8
Image 8
Maytag DN3000 Control Control System Summary Errors, Selectsw Select Switch Summary Errors, Changer Changer Summary Errors

DN5000, DN3000 specifications

The Maytag DN3000 and DN5000 are two robust commercial dishwashers designed to handle the rigorous demands of busy kitchens, making them ideal for restaurants, hotels, and catering operations. What sets these models apart is their combination of efficiency, performance, and durability, which are essential for maintaining high standards of cleanliness and sanitation.

Both the DN3000 and DN5000 feature an advanced wash system that ensures thorough cleaning of dishes, pots, pans, and utensils. The powerful wash pumps are designed to deliver optimal spray coverage, while the stainless steel construction enhances durability and corrosion resistance. This translates into longer-lasting equipment that can withstand the wear and tear of a high-volume environment.

In terms of capacity, the DN3000 can handle up to 300 racks per hour, while the DN5000 steps up the game with a capacity of 500 racks per hour. This makes the DN5000 particularly suited for establishments with heavy dishwashing loads, where speed and efficiency are paramount. Both models are equipped with a built-in booster heater that ensures optimal water temperatures for effective sanitization, which is critical for health and safety compliance.

User-friendly controls are another highlight of these dishwashers. The intuitive digital display allows operators to easily select wash cycles, monitor cycle progress, and troubleshoot issues. Additionally, both models feature automatic drain systems that help prevent clogs and reduce maintenance interruptions.

Energy and water efficiency are also key characteristics of the Maytag DN3000 and DN5000. These dishwashers are designed to minimize water consumption, making them environmentally friendly options that can help lower operational costs. With their ENERGY STAR certification, they meet energy-efficiency guidelines set by the U.S. Environmental Protection Agency.

Both models also come with customizable rack options to maximize washing effectiveness for various types of dishware, from flat dishes to larger pots and pans. Safety features like lockable controls and built-in safety interlocks further enhance operability, providing peace of mind for kitchen staff.

In summary, the Maytag DN3000 and DN5000 dishwashers are engineered for optimal performance in the fast-paced commercial kitchen setting. With their impressive capacity, advanced wash technology, user-friendly controls, and energy efficiency, these models are reliable choices for any food service operation looking to maintain high standards of cleanliness and efficiency.