Lenovo 8420, 8426, 8421, 8145 Selecting a temporary startup device, Changing the startup sequence

Page 44

Selecting a temporary startup device

Use this procedure to startup from any boot device.

Note: Not all CDs, hard disks, and diskettes are startable (bootable).

1.Turn off your computer.

2.Press and hold the F12 key then turn on your computer. When the Startup Device Menu displays, release the F12 key.

Note: If you are using a USB keyboard and the Startup Device Menu does not display using this method, press and release the F12 key repeatedly rather than leaving it pressed when turning on the computer.

3.Select the desired startup device from the Startup Device Menu and press Enter to begin.

Note: Selecting a startup device from the Startup Device Menu does not permanently change the startup sequence.

Changing the startup sequence

To view or change the primary or automatic power-on startup sequence, do the following:

1.Start the Setup Utility program (see “Starting the Setup Utility program” on page 25).

2.Select Startup.

3.Select Startup Sequence. See the information displayed on the right side of the screen.

4.Select the sequence of devices for the Primary Startup Sequence, the Automatic Startup Sequence, and the Error Startup Sequence.

5.Select Exit from the Setup Utility menu and then Save Settings.

If you have changed these settings and want to return to the default settings, select Load Default Settings on the Exit menu.

Exiting from the Setup Utility program

When you finish viewing or changing settings, press Esc to return to the Setup Utility program menu (you might have to press Esc several times). If you want to save the new settings, select Save Settings before you exit. Otherwise, your changes will not be saved.

28User Guide

Image 44
Contents User Guide Types 8095, 8096, 8141 Types 8145, 8420, 8421 Page User Guide Types 8095, 8096, 8141 Types 8145, 8420, 8421 Page Contents Iv User Guide Important safety information Conditions that require immediate actionGeneral safety guidelines ServicePower cords and power adapters Extension cords and related devicesPlugs and outlets BatteriesCD and DVD drive safety Heat and product ventilationTo connect To disconnect Additional safety informationLithium battery notice Modem safety information Laser compliance statementPower supply statement Overview Information resourcesXiv User Guide Installing options FeaturesMemory Operating systems, preinstalled varies by model type Specifications Handling static-sensitive devices Available optionsTools required Installing external options Locating the connectors on the front of your computer Locating the connectors on the rear of your computer Connector Description Obtaining device driversRemoving the cover Locating components Identifying parts on the system boardInstalling memory Installing options Installing adapters What to do nextWhat to do next Installing internal drives Drive specificationsInstalling a drive User Guide Connecting the first optical drive Installing security features Connecting a serial ATA hard disk drivePadlock loop Password protectionChanging the battery User Guide Erasing a lost or forgotten password clearing Cmos Replacing the cover and connecting the cablesUser Guide Using the Setup Utility program Starting the Setup Utility programViewing and changing settings Using passwordsUser password Administrator passwordIDE Drive User Password IDE Drive Master PasswordSelecting a startup device Setting, changing, and deleting a passwordUsing Security Profile by Device Changing the startup sequence Exiting from the Setup Utility programSelecting a temporary startup device Updating flashing Bios from a diskette Updating flashing Bios from your operating systemAppendix A. Updating system programs System programsRecovering from a POST/BIOS update failure Click Continue Click Downloads and driversCleaning a mouse with a ball Appendix B. Cleaning the mouseCleaning an optical mouse User Guide Appendix C. Manual modem commands Basic AT commandsLow speaker volume Set Pulse dial as defaultSet Tone Dial as default Internal speaker on until carrier detectedExtended AT commands MNP/V.42/V.42bis/V.44 commands Fax Class 1 commands Fax Class 2 commandsVoice commands Appendix C. Manual modem commands User Guide Appendix D. Notices Television output notice TrademarksIndex Page Page Part Number 19R0462