Notes:
1.It is recommended that you do not install software which is already on the computer.
2.Before accessing the operating system, ensure that the Drivers and Application software has been installed automatically. After that, the manual installation function can be used. To start the manual installation, restart the operating system, a prompt dialog will pop up asking whether or not to continue automatically installing. Click Cancel.
2.2OneKey Recovery
Main functions:
1.If a Windows operating system is preinstalled on your computer, the OneKey Recovery function works in the following way:
Recover Factory Backup: Recover the computer system partition (drive C) to the original factory default settings.
Note: After this operation, all existing data in the system partition will be lost and other partitions on the disk will remain unchanged. In order to prevent loss of data, be sure to back up important data before this operation.
2.If a Windows operating system is not
Create base backup: In the absence of the factory backup, the Lenovo OneKey Recovery system enables you to back up all data on the current system partition manually after installing the operating system and standard software. Upon completion of the base backup, you can use the Recover Base Backup function to recover the system partition to the original default settings.
Note: Create base backup can only be used once. After the user has performed a base backup, this operation cannot be used again. It is recommended that this operation is performed after installing the Windows operating system and the drivers and software shipped with the computer. Otherwise, the backup space is insufficient.
Recover base backup: This operation recovers the computer system partition (drive C) to the base backup state.
User Guide 17
31039306_Q700_UG_EN_V1.1.indd 17
2009.7.3 3:10:00 PM