Lenovo 9159 manual Installing PCI adapters, What to do next

Page 21

5.Open the retaining clips.

Figura 9. Retaining clips

6.Position the memory module over the memory connector. Make sure that the notch 1 on the memory module aligns correctly with the connector key2 on the system board. Push the memory module straight down into the connector until the retaining clips close.

Figura 10. Positioning the memory module

What to do next:

vTo work with another option, go to the appropriate section.

vTo complete the installation, go to Capitolo 4, “Completing the parts replacement”, a pagina 31.

Installing PCI adapters

This section provides information and instructions for installing and removing PCI adapters. Your computer has four expansion connectors. There are two connectors for PCI adapters, one PCI Express x1 adapter connector (some models), and one for a PCI Express x16 graphics adapter connector (some models).

To install a PCI adapter:

1.Remove the computer cover. See “Removing the cover” a pagina 9.

Capitolo 3. Installing options and replacing hardware 13

Image 21
Contents Page Page ThinkCentre Hardware Installation and Replacement Guide Page Capitolo 2. Overview IndiceIv Hardware Installation and Replacement Guide Lenovo 2005, 2007. Portions IBM Corp Vi Hardware Installation and Replacement Guide Capitolo 1. Important safety information Hardware Installation and Replacement Guide Capitolo 2. Overview Additional information resourcesHandling static-sensitive devices Locations Figura 1. Controls and connectorsFigura 2. Connector locations Locating connectors on the rear of your computerFigura 3. Component locations Locating componentsFigura 4. System board parts locations Identifying parts on the system boardHardware Installation and Replacement Guide Installing external options Capitolo 3. Installing options and replacing hardwareTools required Removing the coverFigura 5. Sliding the cover Accessing system board components and drivesInstalling memory Installing internal optionsHardware Installation and Replacement Guide What to do next Installing PCI adaptersFigura 11. Opening the adapter latch Installing internal drivesDrive specifications Installing a drive in bay Connecting drives Installing a diskette drive in bay Figura 20. Battery removal Replacing the batteryReplacing the hard disk drive Figura 21. Battery installationFigura 22. Removing the hard disk drive Figura 24. Removing the diskette drive Replacing the diskette driveReplacing an optical drive Figura 26. Installing the new diskette driveFigura 28. Retaining bracket for optical drive Replacing the heat sink and fan assemblyFigura 30. Removing the heat sink Figura 32. Removing the system fan assembly Replacing the system fan assemblyFigura 33. Removing the memory module Replacing a memory moduleFigura 35. Removing the adapter Replacing a PCI adapterReplacing a keyboard Figura 36. Installing the new adapterReplacing a mouse Figura 38. Mouse connectorsFigura 39. Sliding on the cover Capitolo 4. Completing the parts replacementObtaining device drivers Integrated cable lock Capitolo 5. Security featuresPassword protection Erasing a lost or forgotten password clearing CmosPadlock Capitolo 5. Security features Hardware Installation and Replacement Guide Appendice. Notices Trademarks Television output noticePage Numero parte 43C4818 Stampato in Italia