Lenovo 9159 manual Replacing a keyboard, Figura 36. Installing the new adapter

Page 37

Figura 36. Installing the new adapter

5.Go to Capitolo 4, “Completing the parts replacement”, a pagina 31.

Replacing a keyboard

Attention

Do not open your computer or attempt any repair before reading the “Important safety information” in the Safety and Warranty Guide that was included with your computer for the computer. To obtain copies of the Safety and Warranty Guide, go to http://www.lenovo.com/support.

This section provides instructions on how to replace a keyboard.

1.Remove any media (diskettes, CDs, or tapes) from the drives, shut down your operating system, and turn off all attached devices.

2.Unplug all power cords from electrical outlets.

3.Locate the keyboard connector.

Nota: Your keyboard might be connected to a standard keyboard connector 1or a USB connector 2. Depending on where your keyboard is connected, see “Locating connectors on the rear of your computer” a pagina 5 or “Locating controls and connectors on the front of your computer” a pagina 4.

Figura 37. Keyboard connectors

4.Disconnect the failing keyboard cable from the computer.

5.Connect the new keyboard to the appropriate connector on the computer.

Capitolo 3. Installing options and replacing hardware 29

Image 37
Contents Page Page ThinkCentre Hardware Installation and Replacement Guide Page Capitolo 2. Overview IndiceIv Hardware Installation and Replacement Guide Lenovo 2005, 2007. Portions IBM Corp Vi Hardware Installation and Replacement Guide Capitolo 1. Important safety information Hardware Installation and Replacement Guide Additional information resources Capitolo 2. OverviewHandling static-sensitive devices Locations Figura 1. Controls and connectorsFigura 2. Connector locations Locating connectors on the rear of your computerFigura 3. Component locations Locating componentsFigura 4. System board parts locations Identifying parts on the system boardHardware Installation and Replacement Guide Installing external options Capitolo 3. Installing options and replacing hardwareTools required Removing the coverFigura 5. Sliding the cover Accessing system board components and drivesInstalling memory Installing internal optionsHardware Installation and Replacement Guide What to do next Installing PCI adaptersFigura 11. Opening the adapter latch Installing internal drivesDrive specifications Installing a drive in bay Connecting drives Installing a diskette drive in bay Figura 20. Battery removal Replacing the batteryReplacing the hard disk drive Figura 21. Battery installationFigura 22. Removing the hard disk drive Figura 24. Removing the diskette drive Replacing the diskette driveReplacing an optical drive Figura 26. Installing the new diskette driveFigura 28. Retaining bracket for optical drive Replacing the heat sink and fan assemblyFigura 30. Removing the heat sink Figura 32. Removing the system fan assembly Replacing the system fan assemblyFigura 33. Removing the memory module Replacing a memory moduleFigura 35. Removing the adapter Replacing a PCI adapterReplacing a keyboard Figura 36. Installing the new adapterReplacing a mouse Figura 38. Mouse connectorsFigura 39. Sliding on the cover Capitolo 4. Completing the parts replacementObtaining device drivers Integrated cable lock Capitolo 5. Security featuresErasing a lost or forgotten password clearing Cmos Password protectionPadlock Capitolo 5. Security features Hardware Installation and Replacement Guide Appendice. Notices Trademarks Television output noticePage Numero parte 43C4818 Stampato in Italia