Lenovo Notebook Computer User Guide
the power consumption after it is idle for a certain time. Press the
Power Switch will restore the previous work environment.
Note: If the AC adaptor and battery pack are both unplugged from the computer while it is in standby mode, all the data that is not saved to the hard disk will be lost.
In Windows XP, you can enter standby mode by either of following
ways:
1.Click Start ‐> Turn Off Computer ‐> Stand By.
2.Click Start ‐> Control Panel ‐> Performance and Maintenance
‐> Power Options ‐> Advanced, then set up how you want the computer to enter standby mode, “close the lid of portable computer”, “press the Power Switch”, or “press the computer sleep button”.
2.1.5Hibernation mode
Hibernation mode suspends the system hard disk (STD). This useful facility saves all the data in memory and video memory to the hard disk. The next time you turn on the computer, the pervious state will restore. If you are using Microsoft Windows XP or Windows 2000 operating systems, you only need to enable this facility through Start ‐> Control Panel ‐> Performance and Maintenance ‐> Power Options ‐> Hibernation.
Under hibernation mode, the system data saves to the hard disk and the computer shuts down to reduce the power consumption. After the computer enters hibernation mode, you can press the Power
33