Lenovo Notebook Computer User Guide
Switch to “wake up” the computer and restore the previous state. If you enable the hibernation facility, when the computer battery is extremely low, the computer will enter hibernation mode automatically by default setting.
The following are ways you can set your computer to enter hibernation mode: “close the lid of portable computer”, “press the Power Switch” or “press the computer sleep button”.
To enable the hibernation facility, Click Start ‐> Control Panel ‐> Performance and Maintenance ‐> Power Options ‐> Hibernate, choose “Enable Hibernation” and click “Apply”.
Hint: If the PC card does not work properly after the system restoress from hibernation mode, remove and re‐install the card and restart the computer.
To quit hibernation mode, press the Power Switch. Press the
keyboard key and touchpad can not quit the hibernation mode.
2.1.6Set up low power protection:
Note: If you do not save your data in time before the battery runs out, and you have no related protection setting for this issue, your data will be lost. So we suggest you to read the following instructions about setting up low power protection.
When the battery power is very low, the computer will notify you by sound. You should save all the data to the hard disk immediately and connect the AC adaptor to the computer.
If you can not connect the adaptor to the computer, turn off the computer or let the computer enter hibernation mode.
34