Sanyo PLC-XK3010 owner manual Snmp setting

Page 29

SNMP setting

SNMP setting

This projector provides a SNMP (Simple Network Management Protocol) agent function. The SNMP consists of a manager and agents. The group which communicates information each other with SNMP is called

"Community". There are two access modes in a community, Refer (read only) and Set (read- write). This projector allows to use Refer (read only) only. The SNMP message informs the pro- jector status called "Trap" to an administrator. Click SNMP Setting on the main menu and set up each item.

PJ information
Item		Description

Contact		Enter user name of the projector etc. (optional)
Place		Enter place of the projector (optional)
Community name(refer)		Enter community name (read only). Default name is "public".

Trap
Item		Description

Community name		Enter community name to send "Trap". Default name is "public".
Trap address		Enter IP address of the SNMP manager computer to receive "Trap".

ENGLISH

29

Image 29

Contents Network Set-up and Operation Wired Setting Projector Set-up and OperationFederal Communications Commission Notice ComplianceAddress Telephone No 818998-7322Safety instructions Table of contents Chapter Web Management function +p.31 FeaturesRequired operating environment for computers Network specifications of the projectorTrademarks Expression/AbbreviationUse of this manual Network Configuration has completed Flow of installationConnect the LAN and set the configuration Preparation Setup Procedures Connecting to the LAN line Description Network PIN code Numerical value is a setting exampleNetwork factory default Wired LAN factory default settings Chapter Basic Setting and Operation Enter the IP address Login the setting page of the projectorLogin Main setting page in the display Display of main settingSub menu tab Switches the sub menu tab Main menu SettingExample of the setting How to use the settingSelect items by ticking on check boxes Select an item by selecting a radio buttonInitial setting PJLink and password setting Network PIN code settingTo 32 alphanumeric characters can be used for the password Whats PJLink?Sets Dhcp configuration ON/OFF Network configurationDisplays the selected LAN mode Mail setting Registering and deleting E-mail addresses Setting Smtp server and administrator addressSetting POP server Setting Smtp authenticationOption selection for sending alert mail OptionExamples Type and contents of alert mail Snmp setting Click Set button if you tick or un-tick the check box on a Up to 99,999 hours can be set for the time settingTrap check/delete Chapter Controlling the Projector Service in need Power control and status checkDisplays the status of the projectors power. Refer to next Popup confirmation windowStatus Description About projector conditionInput ControlItem Description SystemSuppresses the sound. ON, OFF SoundImage adjustment PC adjustment Screen setting Setting up the projectorSetting Sets the image to freeze mode. ON, OFF Sets the black out image temporarily. ON, OFFItems Description InformationInformation Status Indication of the lamp statusControlling the Projector Chapter Appendix To another network Examples of connectionPeer-To-Peer connection Entrance hall Gateway Router installed in the networkUse the IP address assigned to the projector Use of telnetControl Command Function Proxy setting Web browser settingActive Script/JavaScript enable Internet Explorer Examples OS/BrowsersWindows XP Professional Proxy setting Netscape Navigator JavaScript SettingSafari MAC OS X vHow can I restrict access from the computer Why doesn’t the setting page appear in my web browser?How can I install several projectors? Ting Why cant be turned on/off with web browser?Why am I not receiving E-mail alert messages? What are the rules for IP address assignment? What is the MAC address assigned to the projector?Can I update the firmware of the projector SO-KT8AE