Sanyo PLC-XK3010 owner manual Setting up the projector, Screen setting

Page 39

Setting up the projector

Setting up the projector

Click Setting on the main menu. This function is to set up the projector. Select the sub menu [Screen setting] or [Setting] and then set up each set- ting.

Screen setting

This function is to adjust the screen mode of the projector. The values in the text box rep- resent the current screen status.

Item	Description
Screen	Switches the screen mode. (Normal, Full, Wide(16:9), Zoom, True, Custom) There may
Ceiling	not be available mode depending on the input mode as shown in the table below.
Ceiling	Sets the image top/bottom and left/right reversed. (ON, OFF)
Rear	Sets the image left/right reversed. (ON, OFF)
Reset	Resets the Screen settings.

Input source

Screen mode Video Computer

Normal	4	4
Full	4	4
Wide(16:9)	4	4
Zoom	4	4
True	*	4
Custom	4	4

✐The mark "4" means that the available screen mode in the selected input source system. The error message appears when selecting the disabled screen mode indi- cated with "*".

ENGLISH

39

Image 39

Contents Network Set-up and Operation Wired Setting Projector Set-up and OperationTelephone No 818998-7322 ComplianceFederal Communications Commission Notice AddressSafety instructions Table of contents Chapter Web Management function +p.31 FeaturesRequired operating environment for computers Network specifications of the projectorExpression/Abbreviation Use of this manualTrademarks Flow of installation Connect the LAN and set the configurationNetwork Configuration has completed Preparation Setup Procedures Connecting to the LAN line Description Network PIN code Numerical value is a setting exampleNetwork factory default Wired LAN factory default settings Chapter Basic Setting and Operation Login the setting page of the projector LoginEnter the IP address Setting Display of main settingMain setting page in the display Sub menu tab Switches the sub menu tab Main menuExample of the setting How to use the settingSelect items by ticking on check boxes Select an item by selecting a radio buttonInitial setting Whats PJLink? Network PIN code settingPJLink and password setting To 32 alphanumeric characters can be used for the passwordNetwork configuration Displays the selected LAN modeSets Dhcp configuration ON/OFF Mail setting Registering and deleting E-mail addresses Setting Smtp server and administrator addressOption Setting Smtp authenticationSetting POP server Option selection for sending alert mailExamples Type and contents of alert mail Snmp setting Up to 99,999 hours can be set for the time setting Trap check/deleteClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Popup confirmation window Power control and status checkService in need Displays the status of the projectors power. Refer to nextStatus Description About projector conditionInput ControlItem Description System Suppresses the sound. ON, OFF SoundImage adjustment PC adjustment Screen setting Setting up the projectorSetting Sets the image to freeze mode. ON, OFF Sets the black out image temporarily. ON, OFFInformation InformationItems Description Status Indication of the lamp statusControlling the Projector Chapter Appendix Examples of connection Peer-To-Peer connectionTo another network Entrance hall Gateway Router installed in the networkUse of telnet ControlUse the IP address assigned to the projector Command Function Web browser setting Active Script/JavaScript enableProxy setting Examples OS/Browsers Windows XP ProfessionalInternet Explorer Proxy setting Netscape Navigator JavaScript SettingSafari MAC OS X vHow can I restrict access from the computer Why doesn’t the setting page appear in my web browser?How can I install several projectors? Why cant be turned on/off with web browser? Why am I not receiving E-mail alert messages?Ting What are the rules for IP address assignment? What is the MAC address assigned to the projector?Can I update the firmware of the projector SO-KT8AE