Sanyo PLC-XK3010 owner manual Image adjustment

Control

Image adjustment

This function is to adjust the projected picture image and save the image mode. To store the adjusted value, click Store button, and to load the adjusted value, click Load button.

Item	Description
Contrast		Adjusts picture con-
Brightness		trast (0~ 63)
		Adjusts picture bright-
Color		ness (0~ 63)
		Adjusts picture color
Tint		saturation (0~ 63)
		Adjusts picture hue
Iris		(0~ 63)
		Switches iris mode.
Color temp		(ON, OFF)
		Sets a color temperature
		mode. (High, Mid, Low,
White Balance		XLow, User)
Red, Green, Blue		Adjusts each white
		balance respectively.
		(0~ 63)

*When changing the value of the white balance, the color temp. indicates "User".

Sharpness	Adjusts picture
	sharpness. (0~ 15)
Gamma	Adjusts brightness of darker part of the picture. (0~ 15)
Noise reduction	Switches noise reduction mode (OFF, L1, L2)
Progressive	Switches progressive mode (OFF, L1, L2, Film)
Reset	Resets the Image adjustment to previous levels.
Store	Stores the Image adjustment values. Select an item [Image1 - Image4] from
	the pull-down menu and click Store button.

Load image mode..............Loads the Image mode. Select an image mode from the pull-down menu

and click Load button. {Dynamic, Standard, Real, Cinema, Blackboard(Green), Colorboard, Image1 - Image4}

ENGLISH

37