Basic Operation
Operating with Projector Control
Zoom Adjustment
Display “Zoom” on the screen. Press the ZOOM button and then press the point ed buttons to zoom in and out the image.
Focus Adjustment
Display “Focus” on the screen. Press the FOCUS button and then press the point ed buttons to adjust the focus of the image.
Lens Shift Adjustment
Display “Lens shift” on the screen. Use the Point ed7 8 buttons to position the screen to the desired point without having picture distortion.
The screen can be moved up or down to 50 percent, or sideways up to 10 percent from the central axis of the lens shift.
Auto PC Adjustment
Operate the Auto PC Adj. function. The computer screen adjustment can be done easily by pressing this button. See page 35 for details.
Side Control
ZOOM button
FOCUS button
LENS SHIFT button
POINT buttons
|
| INFORMATION.. |
SHUTTER | AUTO PC ADJ.. | button |
| ||
button | button |
|
Zoom
Focus
Shutter Function
Shutter function allows you to completely block out light to the screen. Press the SHUTTER button to close the shutter inside the projector. To open up the shutter, press the SHUTTER button again. Refer to p.55 for detail of setting for the Shutter function.
✔Note:
•The SHUTTER button on the side control and the remote control cannot be effective when Shutter Protection is "On" in the Setting menu. (p.55)
•The SHUTTER indicator on the projector's top lights blue when the shutter is closed. (pp.13, 72)
•The projector will shut down automatically when the set time on Shutter management has passed. (p55)
•The Power management function does not work when the shutter is closed.(p.52)
✔Note:
•The arrow disappears at the maximum lens shift in each direction.
•The arrow turns red when the lens shift comes to the center position of the screen.
27