Sanyo PLC-XF71 owner manual Indicators and Projector Condition, Projector is operating normally

Appendix

Indicators and Projector Condition

Check the indicators for the projector condition.

The projector is operating normally..

			Indicators								Projector Condition
LAMP		READY	WARNING		WARNING		SHUTTER		LAMP 1/2
	red	green	TEMP.		FILTER		blue		REP.
				red	orange				orange
											The projector is off. (The main On/Off switch is OFF
											position or the AC power cord is unplugged.)
						✽		✽		✽	The projector is in stand-by mode. Press the ON/
											STAND-BY button to turn on the projector.
						✽				✽	The projector is operating normally.
											(The Shutter is open)
						✽				✽	The projector is operating normally.
											(The Shutter is closed)
											The projector is preparing for stand-by or the
						✽		✽		✽	projection lamp is being cooled down. The projector
											cannot be turned on until cooling is completed and
											the READY indicator lights green.
						✽				✽	The projection lamp is being cooled down in the
											Power management mode.
						✽				✽	The projector is in the Power management mode.
						✽				✽	The projection lamp is being cooled down in the
											Shutter management mode.
											The projector is in the Shutter management mode.
						✽				✽	Press the ON/STAND-BY button to turn on the
											projector.
								✽		✽	The filter is scrolled using the FILTER button on
											the remote control or the Filter control function in
											the setting menu. When the filter is being scrolled,
											the Filter replacement icon and “Please wait...”
											message (Fig. 1) appear on the screen.
Fig..1 Filter replacement icon and “Please wait...”

• • • on	• • • blinking at the normal rate
	(approx. 1 second ON,
• • • dim	1 second OFF)

• • • blinking slow (approx. 2 seconds ON, 2 seconds OFF)

	• • •blinking fast	✽	• • • Differs according to conditions.
• • • off	(approx. 0.5 seconds ON,
	0.5 seconds OFF)

72