Sanyo PLC-XF71 Resetting the Lamp Counter, Model No.. of your projector, Replacement Lamp Type No

Maintenance and Care

Resetting the Lamp Counter

Be sure to reset the Lamp counter after the lamp is replaced. When the Lamp counter is reset, the LAMP 1/2 REPLACE indicator stops lighting and the Lamp replacement icon disappears.

1	Press the MENU button to display the On-Screen Menu.	Lamp counter
	Use the Point 7 8 buttons to move the red frame pointer
	to the Setting Menu icon
2	Use the Point ed buttons to move the red frame pointer
	to Lamp counter and then press the SELECT button.
	A dialog box appears. Select a lamp and the “Lamp
	replacement counter Reset?” appears. Select [Yes] to
	continue.
3	Another confirmation dialog box appears and select [Yes]
	to reset the Lamp counter.

✔Note:

•Do not reset the Lamp counter without replacing the lamp. Be sure to reset the Lamp counter only after replacing the lamp.

Select a lamp and the “Lamp replacement counter Reset?” appears.

Select [Yes], then another confirmation box appears.

Select [Yes] again to reset the lamp counter.

ORDER REPLACEMENT LAMP

Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following information to the dealer.

●	Model No.. of your projector	:	PLC-XF71
●	Replacement Lamp Type No.	:	POA-LMP128
			(Service Parts No. 610 341 9497)

62