Sanyo PLC-XF71 owner manual Picture Image, Image Adjustment, List, Image Adjust Menu, Pointer Mode

Picture Image

Image Adjustment

1	Press the MENU button to display the On-Screen Menu.
	Use the Point 7 8 buttons to move the red frame pointer
	to the Image Adjust Menu icon.
2	Use the Point ed buttons to move the red frame pointer
	to the desired item and then press the SELECT button

to display the adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value.

Contrast

Press the Point 7 button to decrease contrast; press the Point

8button to increase the contrast (from 0 to 63).

Brightness

Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63).

Color ]

Press the Point 7 button to decrease the intensity of the color;

press the Point 8 button to increase the intensity of the color (from 0 to 63).

Tint ]

Press the Point 7 8 buttons to adjust the tint value to obtain proper color balance (from 0 to 63).

Color Management

The Color Management function can be used to adjust the LEVEL, PHASE, and GAMMA of the selected display colors (except for black, white, and gray) on the screen and replace these colors with other colors if required.

You can store up to eight (8) color management data.

1	Use the Point ed buttons to move the red frame pointer
	to Color Management, and then press the SELECT
	button. The projected image freezes, and the COLOR
	MANAGEMENT POINTER appears.
2	Use the Point ed7 8 buttons to move the pointer to the
	spot where you want to adjust the color and then press
	the SELECT button. The COLOR SELECTION window
	appears, and the color in the center of the pointer is
	selected and you can adjust the color.
3	Use the Point ed7 8 buttons to adjust the LEVEL and
	PHASE of the color, and then press the SELECT button

to confirm the setting. Then use the Point ed buttons to adjust the GAMMA for the color and press the SELECT button to accept the setting. After adjusting, press the SELECT button to go to the COLOR MANAGEMENT LIST.

COLOR SELECTION MODE

LIST

Go to the COLOR MANAGEMENT LIST.

IMAGE ADJUST MENU

Image Adjust Menu icon

Move the red frame pointer to the desired item and then press SELECT button.

Use the Point 7 8 buttons to adjust the setting value.

POINTER MODE

COLOR MANAGEMENT

POINTER

✔Note:

]Displayed in grayout in the computer Input. •Tint cannot be selected when the video system is PAL, SECAM, PAL-M, or PAL-N (p.41).

•Color management is displayed in grayout when there is no signal .

45