Sanyo PLC-XL51 owner manual Part Names and Functions, Freeze button

Part Names and Functions

Remote Control		q ON/STAND-BY button
		Turn the projector on or off (pp.20, 21).
		w COMPONENT button
@1 @2 @3	q	Select COMPONENT input source.
		e AUTO PC button
		Automatically adjust the computer image to its optimum setting
		(pp.26, 29).
		r KEYSTONE button
		Correct the keystone distortion (pp.24, 45).
		t CANCEL button
		Return to the menu bar in Memory Viewer menu. See the
@0		owner's manual of “Memory Viewer function”.
!9	w	y CEILING button
!8		Reverse the top/bottom and left/right of image (p.49).
	e	u IMAGE button
!7	r	Select the image level (pp.26, 32, 40).
		i P-TIMER button
		Operate the P-timer function (p.26).
!6		o MUTE button
		Mute the sound (p.25).
!5	t	!0 LAMP CONTROL button
		Select the lamp mode (pp.26, 51).
	y	!1NO SHOW button
	u
!4		Temporarily turn off the image on the screen (p.26).
		!2 FREEZE button
	i
		Freeze the picture (p.25).
	o	!3VOLUME +/- buttons
!3		Adjust the volume level (p.25).
		!4D.ZOOM ed buttons
		Zoom in and out the images (pp.26, 36).
		!5SELECT button
		–  Execute the selected item (p.22).
		–  Expand or compress the image in Digital zoom mode. (p.36).
		!6Point ed 7 8 buttons
		–  Select an item or adjust the value in the On-Screen Menu (p.22).
		–  Pan the image in Digital zoom + mode (p.36).
!2!1	!0	!7MENU button
		Open or close the On-Screen Menu (p.22).
		!8AUTO SET button
		Execute the setting of Auto setup (includes Input search function,
		and Auto PC adj. function). (pp.25, 49).
✔Note:		!9VIDEO button
To ensure safe operation, observe the		Select VIDEO input source (pp.26, 37).
		@0 S-VIDEO button
following precautions:
–  Do not bend, drop, or expose the remote		Select S-VIDEO input source (pp.26, 37).
control to moisture or heat.		@1COMPUTER 1 button
–  For cleaning, use a soft dry cloth. Do
		Select Computer 1 input source (pp.26, 27, 38).
not apply benzene, thinner, spray, or any
other chemicals.		@2COMPUTER 2 button
		Select Computer 2 input source (p.26, 27).

@3NETWORK button

Select the Network input. See the owner's manual of “Network

Set-up and Operation”.

12