Sanyo PLC-XL51 owner manual Ceiling, Rear, Terminal, Auto setup, Input search

Page 49

Setting

Ceiling

When this function is set to “On,” the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector.

Rear

When this function is set to “On,” the picture is left/right reversed. This function is used to project the image to a rear projection screen.

Terminal

The COMPUTER IN 2/MONITOR OUT terminal on the back of the projector is switchable for computer input or monitor output (p.10). Select Computer 2 or Monitor Out with the Point 7 8 buttons.

Computer 2……computer input

Monitor Out……monitor out

Terminal function is not available when Computer 2 to the input source is selected. Change the input source to the others (Computer1 or Video) so that the Terminal function is available (pp.27, 37–38).

Auto setup

This function enables Input search and Auto PC adjustment by pressing the AUTO SET button on the remote control. Settings for those functions can be altered as follows:

Input search

This function detects the input signal automatically. When finding a signal, the search will stop. Use the Point 7 8 buttons to select one of the followings.

Off …… Input search does not work.

On1 …… Input search works under the situation below.

•When the AUTO SET button on the remote control is pressed.

On2 …… Input search works under the situation below.

•When the projector is turned on with pressing the ON/STAND-BY button on the top control or on the remote control. (After the countdown)

•When the AUTO SET button on the remote control is pressed.

•When the current input signal is missed.

If the No show or Freeze function is active, cancel it to activate the Input search. It is not available when OnScreen menu is displayed.

Auto PC adj.

On . . . . . Enables Auto PC Adjustment when pressing the AUTO SET button on the remote control.

Off . . . . . Disables Auto PC Adjustment.

Ceiling

Rear

Note:

Input search and Auto PC Adj. cannot be set to “Off” at the same time.

While Input search is set On1 or On2, the status of Input and Lamp are displayed every time the signal is switched.

Only the input source selected at the last time can be detected.

If the AUTO SET button on the remote control is pressed while Input search is on, Input search will stop and go back to the previous input signal.

The input source can be switched by pressing the COMPUTER, VIDEO, S-VIDEO, COMPONENT, or NETWORK button on the remote control while Input search is on.

Sync on Green signal does not support Input search.

Input search does not work for Wired/ Wireless Network input sources.

If the INPUT button on the top control is pressed while Input search is on, Input search will stop.

The Auto PC adjustment function can be operated directly with the AUTO PC button on the remote control even when Auto PC adj. is set to “Off” in the Auto setup setting.

49

Image 49
Contents Model PLC-XL51 Large Screen in Limited Space Features and DesignTable of Contents To the Owner Safety PrecautionSafety Instructions Moving the Projector Safety Instructions Air CirculationSide B Side a Side C Side D Side ESide F Federal Communications Commission Notice CompliancePart Names and Functions Top controls and Indicators e Exhaust VentFront Back BottomComputer Part Names and Functions Side TerminalPart Names and Functions Top Alarm indicatorFreeze button Part Names and FunctionsOperating Range Part Names and Functions Remote Control Battery InstallationAdjustable Feet InstallationPositioning the Projector Rear Leg Installation Mounting the Rear Leg and the StandStand Cables used for connection Installation Connecting to a ComputerInstallation Connecting to Video Equipment Video, S-Video Cables used for connection Projector side AC outlet side Installation Connecting the AC Power CordBasic Operation What is PIN code?Turning On the Projector Enter a PIN codeBasic Operation Turning Off the Projector Remote Control Basic Operation How to Operate the On-Screen MenuTop Control Select button On-Screen MenuFor computer source Basic Operation Menu BarFor video source Screen Position Adjustment Basic Operation Zoom AdjustmentFocus Adjustment Keystone CorrectionRemote Control Operation Basic Operation Sound AdjustmentAuto SET button Freeze buttonBasic Operation Input Source Selection Computer InputSource Select Menu PC System Menu Auto Computer Input Computer System SelectionMode Selecting Computer System ManuallyDirect Operation Remote Control Computer Input Auto PC AdjustmentMenu Operation Auto PC adj Computer Input Manual PC Adjustment Computer Input Computer Input Image Level Selection BlackboardGreen Computer Input Image Level Adjustment Normal Screen Size AdjustmentTrue WideDigital zoom + For zooming in and out the imagesDigital zoom Input Source Selection Video, S-Video, Component Video InputAuto Video Component RGB Scart Video Input Input Source Selection RGB Scart 21-pinVideo or S-Video Auto Video Input Video System SelectionComponent Auto AV System Menu Video or S-VideoCinema Video Input Image Level SelectionImage1-4 Video InputColor Video Input Image Level AdjustmentTint Progressive Noise reductionVideo Input Screen Size Adjustment Setting SettingLanguage Setting Menu Language ZoomBlue back Uniformity adjDisplay Logo select Logo Logo and Logo PIN code lock settingsCapture Logo select CaptureChange the Logo PIN code Enter a Logo PIN codeLogo PIN code lock Ceiling Auto setupRear TerminalOn start Power managementRemote control Key lock Security Key lock, PIN code lock, Alarm settingsLamp control To change the code for the projectorEnter a PIN code PIN code lockChange the PIN code lock setting Change the PIN code lock settingChange the PIN code Change the PIN codeFan Lamp Replacement iconFan Control Lamp counterFilter counter Factory defaultTest pattern How to Use the Antitheft Alarm Function Antitheft Alarm FunctionSet and release the Antitheft alarm function IndicatorOther settings Antitheft Alarm FunctionReplace the rechargeable battery pack Charge the built-in battery packHow to replace the rechargeable battery pack SAFETY Precautions for Sanyo Ni-MH Battery Pack Indicators Maintenance and CleaningThen check the matters below Resetting the Filter Counter Maintenance and Cleaning Cleaning the Air FilterReplacement Filter Part No 335 Cleaning the Projector Cabinet Maintenance and Cleaning Cleaning the Projection WindowReset the lamp counter Maintenance and Cleaning Lamp ReplacementService Parts No 337 Maintenance and Cleaning Lamp Replacement Counter Lamp Handling PrecautionsAppendix TroubleshootingImage is out of focus AppendixAppears on the screen Remote Control does not workSound Appendix Menu TreeComputer Input/Video Input Computer InputVideo Input Setting SettingProjector Condition Appendix Indicators and Projector ConditionDisplay Appendix Compatible Computer SpecificationsAppendix Technical Specifications Optional Parts AccessoriesDimensions Appendix Configurations of TerminalsService Port Connector Terminal Mini DIN 8-PIN Appendix PIN Code Number Memo Alarm PIN Code NoAppendix PJ Link Notice KV7A
Related manuals
Manual 1 pages 21.18 Kb

PLC-XL51 specifications

The Sanyo PLC-XL51 is a powerful and versatile portable projector, lauded for its impressive features and advanced technology, making it a preferred choice for both professional presentations and home entertainment.

One of the standout characteristics of the PLC-XL51 is its light output. With a brightness rating of 2,000 ANSI lumens, it delivers clear and vivid images even in moderately lit environments. This feature ensures that presentations maintain their impact without the need for complete dimming of surroundings, enhancing the viewing experience for audiences.

The projector utilizes LCD technology, renowned for its ability to produce bright colors and sharp details. The three-panel design of the PLC-XL51 ensures accurate color reproduction, achieving stunning visuals that captivate viewers. This makes the projector ideal for showcasing multimedia presentations, graphs, and images during meetings or seminars.

Another major feature of the Sanyo PLC-XL51 is its resolution. It offers XGA resolution (1024x768), providing a crisp picture quality that is suitable for various types of content, from text-heavy slides to high-resolution videos. The projector's native resolution is particularly beneficial for educational and business settings, where clarity and precision are paramount.

Portability is another defining characteristic of the PLC-XL51. Weighing in at just 2.7 kg (approximately 6 lbs), it boasts a compact design that enables easy transportation. The projector is equipped with a carrying case and features a quick setup function, allowing users to begin presentations with minimal hassle.

Connectivity options are plentiful, featuring inputs such as VGA, composite video, and audio, which ensure compatibility with a wide range of devices. This versatility facilitates seamless integration with laptops, DVD players, and even gaming consoles for versatile usage.

The Sanyo PLC-XL51 also incorporates a user-friendly interface and intuitive remote control, making it easy to navigate settings. Features such as keystone correction help in adjusting the image for optimal display, while digital zoom and pan functionalities enhance control over presentation visuals.

Overall, the Sanyo PLC-XL51 combines impressive brightness, excellent image quality, and portability, making it an ideal choice for professionals and educators alike. Its array of features and ease of use ensure that it remains a formidable contender in the projection market, appealing to users seeking reliability and performance in their visual presentations.