Sanyo PLC-XL51 owner manual Noise reduction, Progressive

Video Input

Sharpness

Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 15).

Gamma

Use the Point 7 8 buttons to adjust the gamma value to get better balance of contrast (from 0 to 15).

Noise reduction

Noise interference on the screen can be reduced. Select one of the following options to get smoother images.

Off………Disabled.

L1 ………Lower reduction

L2 ………Higher reduction

Progressive

An interlaced video signal can be displayed in a progressive picture. Select one of the following options.

Off………Disabled.

L1……… For an active picture.

L2……… For a still picture.

Film…… For watching a film. With this function, the projector

reproduces pictures faithful to the original film quality.

Reset

To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select “Yes.” All adjustments return to their previous figures.

Store

To store the adjusted data, select Store and press the SELECT button. Select a level from Image 1 to 4 with the Point ed buttons and press the SELECT button. A confirmation box appears and then select “Yes.” Stored data can be called up by selecting “Image” in the Image Level Selection on pages 40-41.

Quit

Exit the Image Adjust Menu.

✔Note:

•Noise reduction and Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected (p.39).

Store

item

Image Level Menu

Move the red frame pointer to an image item to be set and then press the SELECT button.

A confirmation box appears and then select “Yes.”

43