Sanyo PLC-XP200L Side Control and Indicators, Side Control Indicators on the top panel

	Part Names and Functions
Side Control and Indicators
Side Control	Indicators (on the top panel)
q	i
w	u
e	y
	o
r	!0
	!1
t
	!2

qON/STAND-BY button

Turn the projector on or off (pp.26–27).

wINPUT button

Select an input source (pp.35–37).

eMENU button

Open or close the On-Screen Menu (p.28).

rPoint ed7 8 ( VOLUME + / – ) buttons

–Select an item or adjust the value in the On- Screen Menu (p.28).

–Pan the image in Digital zoom + mode (p.44).

–Adjust the volume level (with Point 7 8 buttons) (p.31).

tSHUTTER button

Close and open up the built-in shutter. (p.30)

ySELECT button

–Execute the selected item (p.28).

–Expand or compress the image in the Digital zoom mode (p.44).

uLENS button

Enter the focus, zoom, and lens shift adjustment mode (p.30).

iPOWER indicator

–Light when in stand-by mode and during operations.

–Blink in the Power management mode (p.56).

oLAMP/SHUTTER indicator Light red during operations.

Light blue when the shutter is closed (p.75).

!0LAMP REPLACE indicator

Light orange when the projection lamp reaches its end of life (pp.64, 76).

!1WARNING FILTER indicator

–Blink slow when the filter is being scrolled (pp. 61, 75).

–Blink fast when the filter scroll is not working properly or the filter cartridge is not installed (pp.61, 77).

–Light orange when the clogging of the filter is detected or the filter counter reaches a time set in the timer setting, urging immediate filter/ filter cartridge replacement (pp.60, 61, 77).

!2WARNING TEMP.. indicator

Blink red when the internal temperature of the projector exceeds the operating range (pp.68, 75- 77 ).

13