Sanyo PLC-XP200L owner manual Auto PC Adjustment, Auto PC adj, PC Adjust Menu

Page 39

Computer Input

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer.

Direct Operation

Remote Control

The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote control.

AUTO PC button

Menu Operation

 

Auto PC adj..

 

 

1

Press the MENU button to display the On-Screen Menu. Use

the Point 7 8 buttons to move the red frame pointer to the

 

PC Adjust Menu icon.

2

Use the Point ed buttons to move the red frame pointer

to the AUTO PC adj. icon and then press the SELECT button

twice.

To store the adjusted parameters..

The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting Mode in PC SYSTEM Menu (p.38). See MANUAL PC ADJUSTMENT on pages 40–41.

Note:

Fine sync, Total dots, Horizontal and Vertical position of certain computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required. (pp. 40–41.)

Auto PC Adjustment cannot be operated in Digital Signal Input on the DVI terminal and “480p,” “575p,” “480i,” “575i,” “720p,” “1035i,” or “1080i” is selected on the PC SYSTEM Menu.

Depending on the condition of signals and the type and length of cables, the signals may not be properly viewed.

PC ADJUST MENU

PC Adjust Menu icon

Move the red frame pointer to the Auto PC adj. and press the SELECT button twice.

“Please wait...” appears while the Auto PC adjustment is in process.

39

Image 39
Contents Model PLC-XP200L Features and Design Table of Contents Risk of Electric Shock Do not Open To The OwnerSafety Instructions Top Panel Air CirculationPositioning Precautions Installing the Projector in Proper DirectionsTransporting the Projector Moving the ProjectorCompliance AC Power Cord RequirementAC Power Cord for the United States and Canada AC Power Cord for the United KingdomBottom Part Names and FunctionsFront BackRear Terminal Kensington Security Slot 1MONITOR OUT TerminalSide Control Indicators on the top panel Side Control and IndicatorsRemote Control 7KEYSTONE button @4P-TIMER button5D..ZOOM button 6INPUT 1 3 buttonsRemote Control Battery Installation Remote Control Receivers and Operating RangeWired Remote Control Transmitter Remote Control Code Adjustable Feet InstallationRemoving the lens Lens InstallationAttaching the lens to the projector Focus correction Focus adjustmentDVI-Digital Cable USB Cable BNC Cable Connecting to a Computer Digital and Analog RGBMonitor Out Signal Table Connecting to Video Equipment Video, S-VideoAudio OUT Connecting for Audio SignalConnecting the AC Power Cord For the U..KFor the U..S..A.. and Canada For Continental Europe Enter a PIN code What is PIN code?Basic Operation Turning On the ProjectorTurning Off the Projector On-Screen Menu How to Operate the On-Screen MenuRemote Control Side ControlMenu Bar For Computer SourceFor Video Source Lens Operation Operating with Projector ControlSound Adjustment Direct OperationMenu Operation Operating with Remote Control Freeze button Timer buttonMouse Pointer button Pointer buttonWireless Mouse Operation Pointer FunctionMouse Pointer Input Side Control/Remote control OperationRemote Control Operation Input SelectionComputer Input Source Selection Input MenuSource Select Menu Video Pb/Cb, Pr/Cr Video Input Source SelectionSelecting Computer System Manually Computer InputComputer System Selection Automatic Multi-Scan SystemAuto PC Adjustment PC Adjust MenuAuto PC adj Manual PC Adjustment Store ResetMode free To store the adjusted dataImage Image Level SelectionStandard RealScreen Menu Screen Size AdjustmentDigital zoom + KeystoneCeiling RearPb/Cb, Pr/Cr Jacks Video InputVideo System Selection Video Jack or S-Video JackCinema Provide the image at the normal video aspect ratio Keystone Picture Image Image AdjustmentImage Adjust Menu Pointer ModeDEL Color MMenu Color PaletteGamma White balance Red/Green/BlueOffset Red/Green/Blue SharpnessSetting SettingCapture BackgroundLogo Logo selectChange the Logo PIN code lock setting Enter a Logo PIN codeChange the Logo PIN code Simple mode buttons Remote controlSimple mode To change the code for the remote controlPower management RC sensorOn start Key lock PIN code lock Security Key lockPIN code lock SecurityChange the PIN code Change the PIN Code Lock settingChange the PIN code lock setting Change the PIN CodeLamp counter ShutterProtection ManagementFactory default Filter counterTest pattern Filter Instructions Maintenance and CareTurn off the projector, and unplug the AC power cord Scroll counter Filter counterTop Panel Lamp ReplacementLamp Replace indicator Reset the Lamp counter p.65Order Replacement Lamp Resetting the Lamp CounterLamp Handling Precautions Cleaning the Projector Cabinet Cleaning the Projection LensThen check the matters below Troubleshooting Problem SolutionsAppendix Appendix You cannot operate with Sound Information Image AdjustMenu Tree Computer Input/Video InputScreen PC AdjustComputer Input System Image SelectSetting Projector is operating normally Indicators and Projector ConditionLamp Replace Projector is detecting abnormal conditionAppears on the screen and the Warning Filter Resolution Compatible Computer SpecificationsWXGA+ Technical Specifications PJ Link Notice Lens ReplacementTo the sales and service engineers Optional PartsOutput Configurations of TerminalsControl Port Connector D-sub 9 pin InputPIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No Dimensions Serial Control Interface OperationExample Format Functional Execution CommandStatus Read Command KR7AL