Sanyo PLC-XP200L owner manual How to Operate the On-Screen Menu, Side Control, Remote Control

Basic Operation

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual.

1	Press the MENU button on the side control or the
	remote control to display the On-Screen Menu.
2	Use the Point 7 8 buttons to select a Menu icon. Use
	the Point ed buttons to select an item in the selected
	menu.
3	Press the SELECT button to show the item data. Use
	the Point 7 8 buttons to adjust the values.

To close the On-Screen Menu, press the MENU button again.

✔Note:

• The selected item is not active until the SELECT button is pressed.

Side Control

MENU button

SELECT button

POINT buttons

Remote Control

MENU button

POINT buttons

SELECT button

On-Screen Menu

	Menu icon
Menu bar
Pointer (red frame )		Pointer
		(red frame )
Press the Point ed buttons
to move the pointer.
Item
SELECT
button

Press the SELECT button here to display previous items.

Item data

Press the Point 7 8 buttons to adjust the value.

Press the SELECT button here to display next items.

Quit

Exit this menu.

28