Sanyo POA-PN02 Configuration for IP Address/ Sub net/ Gateway*/DNS, How to enter the numbers

Network configuration

2 Configuration for IP Address/ Sub net/ Gateway*/DNS*

Press SELECT button again, the following network setting menu appears on the screen. Enter the specified network address.

How to enter the numbers

There are 2 ways to enter the num- bers, one is by using the point buttons (d e 7 8) on the remote control handset or on the projector, the other is by using the screen 10-key pallet by which the numbers can be entered directory. For further information see next page.

3 Restart the Network Unit

Select Set with 7 8 keys and press SELECT button again. The network configu- ration display disappears and the network unit begins restarting. It takes about 40 seconds. Do not turn off the mains switch during this period.

Completing of installation

Now the installation is completed. The IP address of this projector is set to “192.168.1.201”.

*In the network environments not using a Gateway or Router, the Default Gateway address should be set to [0.0.0.0]. If you do not use the functions E-mail or DNS server, it is also set [0.0.0.0] for the DNS address.

Network Unit

OWNER’S MANUAL

ENGLISH

19