Chapter 5 Network Viewer & Capture
Using the Network Capture function
The Network Capture is a function to project the screen images of the computer by the projector via the network by using the Network Viewer software. Up to 10 com- puters can be registered and the capture images of the computer projected by the projector can be selected by the Network Capture software in the computer, web browser and projector. *The network capture function cannot be used when using the network
viewer function.
Launching the Network Viewer 
After installing the Network Capture software, the shortcut icon is copied into the “Startup” folder. When you boot the computer, the Network Capture software also starts and its icon stays on the task bar. If the icon is not appeared on the task bar, the Network Capture software does not start. Click “Network Capture” from “Start” - “All the Programs” - “Network Viewer & Capture” menu to launch it manually. The status which the Network Capture icon stays on the task bar is just preparing the screen capturing.
Parameter Determination
1 Click Network Capture icon on the task bar.
2 Click “Parameter Determination” on
the popup menu. The setting window will appear.
3 Set Capture Port and Mouse Port to match to the projector’s port number.
*To check the projector’s setting, access to the control page with the web browser. For further instruction, please see item “Control by the web browser” (☞ p.62)
*Specify the port number of TCP/IP. The default port set- ting is 9000 and 9001 respectively. There are some reserved port numbers and also some applications may use their own port numbers. If one of those port num- bers is used, the alert dialog window will appear and let
you know that it is an invalid port number. In this case, use another port number.
*The reserved port numbers are http (80), ftp (21), telnet (23), etc. The port no. 10000 is reserved to control the projector through the LAN port.
60