Sanyo POA-PN02 owner manual Check the status of projector, Items

Check the status of projector

Check the status of projector

In the “Power & Status” page, you can control the projector power, and also you can check the status of the projector as follows. To change the page, click on the page number linked text.

Items	Description
Accumulated
Lamp-use Time		Displays the accumulated lamp use time in hour units (h).
Accumulated
Projector-use Time		Displays the accumulated projector use time in hour unit (h).
Power Status	..................	Displays the status of the lamp.
Projector Condition		Displays the status of the projector's power.
		* When occurring the internal power failure, The word “Power Failure”
		and its error information code such as “FFFEFFFF” are displayed.
		Unplug the projector from AC outlet and ask servicing to a qualified
		service personnel with this information code.
Input Status		Displays the selected input mode.
Selection		Displays the source mode of selected input mode.
Signal Status	..................	Displays the signal status of the selected input mode.
Internal temperature		Displays the temperature at internal thermal sensors in centigrade/ fahren-
		heit degrees. The icons [A], [B] and [C] on the page represent the thermal
		sensors located in the projector. If the temperature at one of those sensors

exceeds specified temperature, the appearance of its icon changes to the following alert icon to let users know the abnormal temperature. Please check surrounding temperature of the projector, the clogged air filters and the area surrounding the ventilation fans.

The icons [A], [B] and [C] represent the sensors located in the projector as follows: [A]: Surrounding temperature of the projector*.

[B]: Surrounding temperature of the lamp.

[C]: Surrounding temperature of the panel.

*The indicated peripheral temperature of the projector is a little higher than actual surrounding temperature.

Network Unit

OWNER’S MANUAL

ENGLISH

39