Use of telnet
3 When communication is established, the word “PASSWORD:” appears on the window. Type the login password* for the projector and then press “Enter” key on the keyboard. If you do not register the login password, just press “Enter” key.
When the word “Hello” is replied, login has been succeeded.
* For example, entering pass- word [1234]
4 Type the commands from the key board to control the external equipment and then enter “Enter” key for termination. For example, type “C00” and enter “Enter” key.
-The extra projector will be turned on.
*“C00” is a command to turn the projector on.
To disconnect the communication, type “Ctrl” key and “]” key at the same time.
ENGLISH
*1 Further instructions about the telnet application, please see the
*2 The commands are defined by each product independently, so please consult the manufac- turer or sales dealer for further information of the commands.
*The password is a login password decided on page 20 or 30. If the authentication of the entered password is failed 4 times continuously, the communication will be disconnected automatically. Please try again for the connection.
Network Unit
OWNER’S MANUAL
91