Sanyo PLC-XC56 owner manual Video Input, Store Menu, Noise reduction, Progressive

Video Input

Sharpness

Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 15).

Gamma

Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).

Noise reduction

Noise interference on the screen can be reduced. Select one of the following options to get smoother images.

Off	Disabled.
L1	Lower reduction
L2	Higher reduction

Progressive

An interlaced video signal can be displayed in progressive mode. Select one of the following options.

Off	Disabled.
L1	For an active picture.
L2	For a still picture.
Film	For watching a film. With this function, the
	projector reproduces pictures faithful to the
	original film quality.

Reset

To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures.

Store

To store the adjusted data, select Store and press the the Point ► or the SELECT button. Use the Point ▲▼ buttons to select one from Image 1 to 4 and press the SELECT button.

A confirmation box appears and then select Yes. Stored data can be called up by selecting an Image (1–4)in the Image Mode Selection on page 40.

Note:

Noise reduction and Progressive cannot be selected when 480p, 575p, 720p, 1035i or 1080i is selected (p.39).

Store Menu

A confirmation box appears and then select Yes.

42