Setting
Lamp control
Lamp control
This function allows you to change brightness of the screen.
Normal | Normal brightness |
Eco | Lower brightness reduces the lamp |
| power consumption and extends the |
| lamp life. |
Lamp life control | Lamp life control | |
Select the lamp operation when the total lighting time of a |
| |
lamp exceeds the recommended total hours of use. |
| |
Mode 1 | The lamp can be turned on even after |
|
| exceeding the recommended total |
|
Mode 2 | hours of use. |
|
The lamp can be turned on even after |
| |
| exceeding the recommended total |
|
| hours of use. But the projector turns off |
|
| automatically after 3 minutes. |
|
Note:
•Lamp mode cannot be changed for a while after turning on the projector. Lamp needs some time to stabilize after the power is turned on. Stored lamp mode will be active after the lamp is stabilized.
•If Mode 2 has been selected and the projection lamp exceedes the recommended total hours of use, the replacement icon will be displayed at the time of power- on. Then the projector will turn off after 3 minutes.
Lamp replacement icon
•The Lamp replacement icon will not appear when the Display function is set to Off (p.46), during Freeze (p.25), or No show (p.26).
52