Sanyo PLC-XC56 owner manual Top Control

Part Names and Functions

Top Control

①	②	③	④
				⑤

⑪ ⑩ ⑨ ⑧ ⑦ ⑥

①POWER indicator

–Lights red when the projector is in stand-by mode.

–Lights green during operations.

–Blinks green in the Power management mode (p.51).

– Blink red during cooling down.

②LAMP REPLACE indicator

Turn yellow when the life of the projection lamp draws to an end. (pp.64, 72-73)

③WARNING TEMP.. indicator

–Lights red when the projector detects an abnormal condition.

–Blinks red when the internal temperature of the projector exceeds the operating range (pp.59, 72-73).

④WARNING FILTER indicator

–Blink slow when the filter is being scrolled. (pp.60, 72)

–Blink fast when the filter cartridge is not installed. (pp.60, 73)

–Light orange when the clogging of the filter is detected or the filter counter reaches a time set in the timer setting, urging immediate filter/filter cartridge replacement. (pp.56, 60, 73)

⑤POINT ▲▼ buttons

–Select an item or adjust the value in the On-Screen Menu. (p.21)

–Pan the image in Digital zoom + mode. (p.36)

⑥SELECT button

–Execute the selected item (p.21).

–Expand or compress the image in the Digital zoom mode (p.36).

⑦POINT ◄► (VOLUME +/–) buttons

–Select an item or adjust the value in the On-Screen Menu (p.21).

–Pan the image in the Digital zoom +/- mode (p.36).

–Adjust the volume level (Point ◄►buttons) (p.24).

⑧MENU button

Open or close the On-Screen Menu (p.21).

⑨INPUT button

Select an input source (pp.27-28, 37-38).

⑩AUTO SETUP button

Execute the setting of Auto setup (includes Input search, Auto PC adj. and Auto Keystone functions) in the setting menu. (pp.23, 45).

⑪ON/STAND–BY button

Turn the projector on or off (pp.18, 20).

10