Sanyo PLC-SL20 owner manual Remote Control Operating Range, Remote Control Batteries Installation

Page 15

Part Names and Functions

Remote Control Operating Range

Point the remote control toward the projector (Infrared Remote Receiver) whenever pressing any button. Maximum operating range for the remote control is about 16.4’ (5m) and 60° in front of the projector.

16.4’ (5 m)

60°

Remote Control Batteries Installation

1	Remove the battery
	compartment lid.

Press the lid down- ward and slide it.

2	Slide the batteries into	3	Replace the compartment
	the compartment.		lid.

Two AA size batteries For correct polarity (+ and

–), be sure battery terminals are in contact with pins in compartment.

To insure safe operation, please observe the following precautions :

●Use (2) AA, UM3 or R06 type alkaline batteries.

●Replace two batteries at the same time.

●Do not use a new battery with a used battery.

●Avoid contact with water or liquid.

●Do not expose the remote control to moisture, or heat.

●Do not drop the remote control.

●If a battery has leaked on remote control, carefully wipe case clean and install new batteries.

●Risk of explosion if battery is replaced by an incorrect type.

●Dispose of used batteries according to the instructions.

15

Image 15

Contents Model PLC-XL20 PLC-SL20 Table of Contents Risk of Electric Shock Do not Open To the OwnerVoor de klanten in Nederland Safety InstructionsMoving the Projector Safety InstructionsInstalling the Projector in Proper Position Air CirculationFederal Communication Commission Notice Compliance200 240 V AC ComplianceFor Continental Europe For the U.K For the U.S.A. and CanadaFeatures and Design Bottom Part Names and FunctionsFront BackTerminal Part Names and FunctionsTop Power ON-OFF buttonSignal Emission indicator Remote ControlPointer Function Laser Pointer FunctionWireless Mouse Operation Remote Control CodeRemote Control Batteries Installation Remote Control Operating RangeInstallation Adjustable FeetPositioning the Projector Connecting to a Computer InstallationConnecting to Video Equipment TerminalsProjector Basic Operation Turning On the ProjectorTurning Off the Projector Basic Operation Zoom AdjustmentFocus Adjustment Keystone AdjustmentDirect Operation Timer FunctionSound Adjustment No Show FunctionOn-Screen Menu Remote ControlOn-Screen Menu Top ControlMenu Bar Input Source Selection Computer InputMode Computer InputComputer System Selection AutoComputer Adjustment Auto To store adjustment dataAuto PC Adj Computer Adjustment Manual To clear adjustment data ResetMode free Display area To store adjustment dataImage button Standard Real Image Level SelectionStandard RealImage Level Adjustment Screen Size Adjustment Auto Video InputInput Source Selection Video, S-Video Input button Video Computer Video button VideoRGB Scart Video InputInput Source Selection Component, RGB Scart 21-Pin ComponentAV System Menu Component Video System SelectionVideo or S-Video AV System Menu Video or S-VideoImage button Standard Cinema CinemaColor TintProgressive Resets all adjustment to their previous figure Setting SettingSetting To change the code for the projector To change the code for the remote controlMaintenance and Cleaning Projector is shut down and the Warning indicator lights redThen check the items below Cleaning the Projector Cabinet Maintenance and CleaningCleaning the Air Filters Cleaning the Projection LensPOA-LMP65 for PLC-SL20 Lamp ReplacementReset the Lamp replace counter POA-LMP55 for PLC-XL20Lamp Replace Counter When the lamp replace counter is reset, the LampAppendix TroubleshootingAppendix Projector Condition Indicators and Projector ConditionInput PC AdjustImage Select Image Adjust Screen Menu TreeImage Select 575pSettingCompatible Computer Specifications FreqKHz Technical Specifications Configurations of Terminals Terminal HDB15-PIN Pin ConfigurationTerminal DVI-I Pin Configuration Optional Parts Attaching the Lens Cover Page Part No 312 1291 1AA6P1P4384-- PG3A