Sanyo PLC-SL20 owner manual Color, Tint, Progressive

Video Input

Image Level Adjustment

1	Press the MENU button and the On-Screen Menu will appear.
	Press the Point Left/Right button to move the red frame pointer
	to the Image Adjust Menu icon.
2	Press the Point Down button to move the red frame pointer to
	the item that you want to adjust and then press the SELECT

button. The level of each item is displayed. Adjust each level by pressing the Point Left/Right button.

Contrast

Press the Point Left button to decrease contrast and the Point Right button to increase contrast. (From 0 to 63.)

Brightness

Press the Point Left button to adjust image darker and the Point Right button to adjust image brighter. (From 0 to 63.)

Color

Press the Point Left button to lighten color and the Point Right button to deepen color. (From 0 to 63.)

Tint

Press the Point Left/Right button to obtain proper color. (From 0 to 63.)

Color temp.

Press the Point Left/Right button for Color temp. level that you want to select. (XLow, Low, Mid, or High)

White balance (Red)

Press the Point Left button to lighten red tone and the Point Right button to deepen red tone. (From 0 to 63.)

White balance (Green)

Press the Point Left button to lighten green tone and the Point Right button to deepen green tone. (From 0 to 63.)

White balance (Blue)

Press the Point Left button to lighten blue tone and the Point Right button to deepen blue tone. (From 0 to 63.)

Sharpness

Press the Point Left button to soften the image and the Point Right button to sharpen the image. (From 0 to 15.)

Gamma

Press the Point Left/Right button to obtain better balance of contrast. (From 0 to 15.)

Progressive

Interlace video signal can be displayed in a progressive picture. Off ···· Not activated.

L1 ···· Select “L1” for an active picture.

L2 ···· Select “L2” for a still picture.

Image Adjust Menu

Image Adjust Menu icon

Move the red frame pointer to the item to be selected and then press the SELECT button.

Press the Point Left/Right but- ton to adjust value.

Press the SELECT button at this icon to display other items.

Press the SELECT button at this icon to display previous items.

Press the SELECT button at this icon to store the value.

NOTE

●The Tint cannot be adjusted when the video system is PAL, SECAM, PAL-M, or PAL-N.

●Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected.

36