Sanyo PLC-SL20 owner manual Computer Adjustment Manual

Computer Input

Computer Adjustment (Manual)

Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. This projector has Manual PC Adjustment to enable you to precisely adjust several parameters to match those signal formats. The projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use it.

1	Press the MENU button and the On-Screen Menu will appear. PC Adjust Menu
	Press the Point Left/Right button to move the red frame pointer
	to the PC Adjust Menu icon.
2	Press the Point Down button to move the red frame pointer to
	the item that you want to adjust and then press the SELECT

button. An adjustment dialog box will appear. Press the Point Left/Right button to adjust value.

Fine sync

Adjusts an image as necessary to eliminate flicker from the display.

Press the Point Left/Right button to adjust value. (From 0 to 31)

PC Adjust Menu icon

Move the red frame pointer to an item and press the SELECT button.

Total dots

Adjusts the number of total dots in one horizontal period. Press the Point Left/Right button and adjust number to match your PC image.

Horizontal

Adjusts horizontal picture position. Press the Point Left/Right button to adjust the position.

Vertical

Adjusts vertical picture position. Press the Point Left/Right button to adjust the position.

Current mode

Press the SELECT button to show the information of the connected computer.

Clamp

Adjusts clamp level. When the image has dark bars, try this adjustment.

	Shows status
Selected Mode	(Stored / Free) of the
	selected Mode.

Press the Point Left/Right button to adjust the value.

Press the SELECT button at this icon to display other items.

Current mode

Press the SELECT button at the Current mode icon to show the information of the connected computer.

Press the SELECT button at this icon to jump to the top item.

27