Sanyo PLC-SL20 Basic Operation, Zoom Adjustment, Focus Adjustment, Keystone Adjustment

Page 20

Basic Operation

Zoom Adjustment

Move the Zoom Lever to zoom in and out.

Zoom Lever

Focus Adjustment

Rotate the Focus Ring to adjust the projected picture focus.

Focus Ring

Keystone Adjustment

If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment.

1

Press the KEYSTONE button on the remote control or select

 

Keystone in the Setting Menu (p38). The keystone dialog box

 

appears.

 

2

Correct

keystone distortion by pressing the Point

 

Up/Down/Left/Right button. Press the Point Up button to

reduce the upper part of the image, and press the Point Down button to reduce the lower part. Press the Point Left button to reduce the left part, and press the Point Right button to reduce the right part.

Keystone adjustment can be memorized. (p38)

The arrows are white when there is no correction.

The arrows disappear at the maximum correction.

The direction of the arrow being corrected turns red.

If you press the KEYSTONE button on the top control or on the remote control once more while the keystone dialog box is being displayed, the keystone adjustment will be canceled.

Reduce the upper width

Reduce the lower width

Reduce the left part with

with Point Up button.

with Point Down button.

Point Left button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reduce the right part with Point Right button.

Picture Freeze Function

Press the FREEZE button on the remote control to freeze the picture

 

on the screen. To cancel the FREEZE function, press the FREEZE

 

button again or press any other button.

FREEZE button

20

Image 20
Contents Model PLC-XL20 PLC-SL20 Table of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandSafety Instructions Installing the Projector in Proper PositionAir Circulation Moving the ProjectorCompliance Federal Communication Commission NoticeCompliance For Continental Europe For the U.KFor the U.S.A. and Canada 200 240 V ACFeatures and Design Part Names and Functions FrontBack BottomPart Names and Functions TerminalPower ON-OFF button TopRemote Control Signal Emission indicatorLaser Pointer Function Pointer FunctionRemote Control Code Wireless Mouse OperationRemote Control Operating Range Remote Control Batteries InstallationPositioning the Projector InstallationAdjustable Feet Installation Connecting to a ComputerProjector Connecting to Video EquipmentTerminals Turning Off the Projector Basic OperationTurning On the Projector Zoom Adjustment Focus AdjustmentKeystone Adjustment Basic OperationTimer Function Sound AdjustmentNo Show Function Direct OperationRemote Control On-Screen MenuTop Control On-Screen MenuMenu Bar Computer Input Input Source SelectionComputer Input Computer System SelectionAuto ModeAuto PC Adj Computer Adjustment AutoTo store adjustment data Computer Adjustment Manual Reset Mode freeDisplay area To store adjustment data To clear adjustment dataImage Level Selection StandardReal Image button Standard RealImage Level Adjustment Screen Size Adjustment Video Input Input Source Selection Video, S-VideoInput button Video Computer Video button Video AutoVideo Input Input Source Selection Component, RGB Scart 21-PinComponent RGB ScartVideo System Selection Video or S-VideoAV System Menu Video or S-Video AV System Menu ComponentCinema Image button Standard CinemaProgressive ColorTint Resets all adjustment to their previous figure Setting SettingSetting To change the code for the remote control To change the code for the projectorThen check the items below Maintenance and CleaningProjector is shut down and the Warning indicator lights red Maintenance and Cleaning Cleaning the Air FiltersCleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Reset the Lamp replace counterPOA-LMP55 for PLC-XL20 POA-LMP65 for PLC-SL20When the lamp replace counter is reset, the Lamp Lamp Replace CounterTroubleshooting AppendixAppendix Indicators and Projector Condition Projector ConditionPC Adjust Image Select Image Adjust ScreenMenu Tree Input575pSetting Image SelectKHz Compatible Computer SpecificationsFreq Technical Specifications Terminal DVI-I Pin Configuration Configurations of TerminalsTerminal HDB15-PIN Pin Configuration Optional Parts Attaching the Lens Cover Page Part No 312 1291 1AA6P1P4384-- PG3A