Hitachi GR2000-B Series quick start Table of Contents

Table of Contents

Chapter 1 - Introduction			1-1
1.1	Documents about the GR2000-B models		1-1
Chapter 2 - Setup Process			2-1
2.1	Check that All Necessary Components are Present		2-1
2.2	Assemble the Required Tools for Setup		2-1
2.3	Setting Up the GR2000-B		2-2
	2.3.1 The GR2000-1B		2-2
	2.3.2 GR2000-2B		2-3
2.4	Dangers, Cautions, and Notes Regarding Setup		2-5
2.5	Installing the GR2000-B on a Table or Desk		2-6
2.6	Attaching and Detaching the Power Cable		2-7
2.7	Installing a Memory Card		2-8
2.8	Software		2-10
2.9	The Setup Terminal and Cable Connections		2-11
	2.9.1	Setup Terminal	2-11
	2.9.2	Connecting Cable	2-11
	2.9.3 Connecting a Setup Terminal to the GR2000-B		2-12
	2.9.4 Connecting the GR2000-B to Other Devices		2-12
	2.9.5 Turning the Power Switch ON		2-13
2.10 Normal Start-Up Process for the GR2000-B			2-13
	2.10.1 Turning the Power OFF		2-13
Chapter 3 - Basic Operations			3-1
3.1	Configuration Examples		3-1
3.2	Startup of the GR2000-B		3-2
	3.2.1	First-Time Login	3-2
	3.2.2	Setting the Time	3-2
3.3	Setting the Configuration		3-3
	3.3.1	Enter the Administrator Mode	3-3
	3.3.2	Enter the Configuration Edit Mode (Begin Editing the Configuration)	3-3
	3.3.3	Open the Configuration File	3-4
	3.3.4	Set an IP Address for the Ethernet Port	3-4
	3.3.5	Set a Default Route	3-4
GR2K-GA-0008			xiii
Rev. 1.00