Hitachi GR2000-B Series quick start Installing a Memory Card

Hitachi Gigabit Router GR2000-B Series Quick Start Guide

1.As shown in Figure 2-7,make sure that the power switch is depressed in the OFF

(0) position and plug the other end of the cable into the AC outlet you plan to use.

ON

OFF

Power Switch

Figure 2-8 Location of Power Switch

2.7Installing a Memory Card

This procedure shows the process for installing and removing a memory card from memory card slot 0. The operations for the memory card slot 1 are same as those for the memory card slot 0.

(1) Installing a Memory Card

1.Insert a memory card in the position shown in Figure 2-9and Figure 2-10below. When successfully inserted the lever next to the slot will be pushed forward.

		Memory Card
		(Part number
	should be face up)		Memory Card
			Slot
Figure 2-9 Installation of a Memory Card
*		Note: When inserting a memory card, the surface labeled with the part number
		“HN-F9531-MC64X (BMC64)” should be face up.

2-8	GR2K-GA-0008
	Rev. 1.00