Hitachi PW1 user manual Features

Page 5

Important

Please read this User's Manual thoroughly, especially the Important Safety Instructions on Page 2 to 3 and 6 to 10. Mis-use may cause damage to your plasma monitor, which could shorten its lifespan, or cause injury to yourself. Should you encounter any difficulty in the set-up or operation of your monitor, firstly refer to the Troubleshooting guide at the rear of this manual.

In the unlikely event of a problem occurring with your plasma monitor, switch off at the mains sockets, pull out the plugs, and contact your dealer immediately.

CAUTION

Under no circumstances remove the rear cover of your plasma monitor.

Never guess or take any chances with electrical equipment of any kind - it is better to be safe than sorry!

Software Notice

It is prohibited for the end user of this product to copy, reverse engineer or reverse compile the software included therein, save to the extent permitted by law.

Plasma Monitor

After the plasma monitor has been on for any length of time, you will notice that the screen becomes warm. Please note that this is normal. Sometimes the screen might have some tiny bright or dark spots. Please note that this is normal.

CAUTION

To prevent scratches or damages to the plasma screen, do not knock or rub the surface with sharp or hard objects. Clean the screen with a soft cloth moistened with warm water and dry with a soft cloth. A mild soap may be used if the screen is extremely dirty. Do not use harsh or abrasive cleaners!

CAUTION

Use a soft cloth to clean the cabinet and control panel of the monitor. When excessively soiled dilute a neutral detergent in water, wet and wring out the soft cloth and afterward wipe with a dry soft cloth.

Never use acid/alkaline detergent, alcoholic detergent, abrasive cleaner, powder soap, OA cleaner, car wax, glass cleaner, etc. especially because they would cause discoloration, scratches or cracks.

FEATURES

Large-screen, high-definition plasma display panel

The 42-inch color plasma display panel, with a resolution of 1024 (H) x 1024(V) pixels, creates a high-definition, large-screen (aspect ratio

:16:9) and low-profile flat display. Free from electromagnetic interferences from geomagnetic sources and ambient power lines, the panel produces high-quality display images free from color misconvergence and display distortion.

High Performance Digital Processor

A wide range of personal computer signals can be handled, from 640 x 400, 640 x 480 VGA to 1600 x 1200 UXGA.

Easy-to-use remote control and on screen display system

The remote control included eases the work of setting display controls. Further, the on-screen display system, displays the status of signal reception and display control settings in an easy-to-view fashion.

Power saving system

The International ENERGY STAR® power saver feature saves power consumption automatically when input signals are not available. When connected to a VESA DPMS-compliant PC, the monitor cuts its power consumption while it is idle.

TruBass

TruBass, SRS and (O) symbol are trademarks of SRS Labs, Inc. TruBass technology is incorporated under license from SRS Labs, Inc.

About the Optional Video Unit

The following functions can be obtained by connecting the optional video unit.

(1)A composite/S terminal and two component terminals have been added. A composite video output terminal is also provided as a monitoring output.

(2)A wide range of devices other than personal computers can also be connected.

(3)A component input is possible to switch to RGB signals from the Menu screen.

(4)A SCART terminal is also provided for the signal of the European standard. It operates as composite/S/RGB input terminal, or video output terminal.

Options

Ask your local retail dealer for further details.

1.Desktop stand:

• CMPAD25

2.Plasma monitor speaker:

• CMPAS14

2 way speaker unit with one 2.5cm dome

 

type tweeter and two 8cm round type

 

woofers (color: dark gray)

3.Video unit: CMPAVW1

An expansion unit for viewing video with this device.

4

Image 5
Contents 42HDM70 English Power Source Important Safety InstructionsPrevention of Screen Burn Disposal of this product may require specific instructionsPublic Viewing of Copyrighted Material Read before operating equipmentFeatures Contents About the Symbols Safety InstructionsBe cautious of the power cord connection Safety InstructionsBe sure to keep safety ground connection Be careful in handling the battery of the remote controlRemove the power cord for complete separation Avoid a high temperature environmentInstallation environment How to view the monitorPrecaution during transportation Precautions for the cable connectionDo not physically impact the remote control Set the sound volume at a suitable levelFCC Federal Communications Commission Statement Warning Main Unit Component NamesLoading Batteries Component Names Remote controlHandling the Remote Control Installation Installation InstructionsAnti-tumble measures Securing to a wall or pillarMonitor rear panel Installation InstructionsConnecting to a PC English Operating Instructions Turning Power On and OffIndicating lamp IndicatingInput Switching Operating Instructions Volume AdjustmentWhen a button is pressed, the volume adjustment Audio MuteInput Signal Screen Display Size SwitchingDisplay area selection diagram RGB input Operating InstructionsAutomatic Adjustment of Screen Position and the Clock Operating Instructions Using the Menu ScreenOn-screen display system Independent Operation of Multiple Monitors ID NoPicture Menu Audio Menu Timer Menu60Min Function MenuSetup Menu Language Menu Other FeaturesAutomatic Store Menu Display Registration conditionPower Save Mode Other Features Signal CheckWhen the RGB1, RGB2 input is selected Status Display ActionMethods to Reduce the Occurrence of Image Retention Image Retention of Plasma DisplayAbout screen defects About residual imagesSymptoms That Seemingly Appear to be Failures TroubleshootingSymptom Point to check Check the way the signal cable is connectedSymptom Point to check Example Troubleshooting Actions to Correct Abnormal DisplaysSignal Input Product SpecificationsRGB terminal D-sub 15-pin connector Pin Input signalRecommended Signal List Product Specifications Signal InputWith Digital RGB signal input RGB1 input Pin Input signalXGA Product Specifications Recommended Signal ListWith Analog RGB signal input RGB2 input Supplement An example of connecting video imaging devices Connecting to a Video Imaging DeviceWith DVI-STB and RGB component setup Optional Video Unit FunctionFull Display size selection diagramAV1 AV2 AV3 RGB2 RGB1 AV4 Position + Using a wide-screen monitorPictures Split Operating Instructions Displaying Multi PictureYNR YNR Operating Instructions Picture MenuCNR LTIItem is added to the Menu shown AV4 AV1AV2 AV3 RGB1 Operating Instructions Setup MenuAV1 AV2 AV3 AV4 Video input Pin Signal Input connector pin specificationsScart connector pin specifications With component input AV1, AV2 and RGB2-component input With R, G, B Video input AV2 and AV4 inputKHz MHz 525Remarque QR58563