Hitachi PW1 user manual Picture Menu

OPERATING INSTRUCTIONS (continued)

PICTURE MENU

MENU

Picture

Audio

Timer

Function

Setup

Language

Select

OK Set

	Picture
OK		Contrast			:	+ 31	OK
		Brightness			:	– 31
		Color			:	0
		Tint			:	+ 31
		Picture Enhancement			:	Off
		Color Temperature			:	Normal
		Color Temp.Adjust
		Reset				Reset
		Select	OK	Set		Return

Picture
	Contrast			:	+ 31
	Brightness			:	– 31	OK
	Color			:	0
	Tint			:	+ 31
	Picture Enhancement			:	Off
	Color Temperature			:	Normal
	Color Temp.Adjust
	Reset				Reset
	Select	OK	Set		Return

Picture
Contrast			:	+ 31	OK
Brightness			:	– 31
Color			:	0
Tint			:	+ 31
Picture Enhancement			:	Off
Color Temperature			:	Normal
Color Temp.Adjust
Reset				Reset
Select	OK	Set		Return

Contrast		+ 31
Next / Prev	Adjust	Return

Color Temperature		Normal
Next/Prev	Select	Return

Picture
Color Temp. Adjust			On
Amplitude
Red		– 63
Green		0
Blue		– 31
Cut Off
Red		+ 31
Green		0
Blue		+ 31
Reset				Reset
Select	On/Off			Return

Selected characters

▲

▲

Contrast

Narrows the gap between

Broadens the gap between

brightness and darkness.

brightness and darkness.

Brightness

Black is subdued for

Black is set off for increased

increased overall darkness.

overall brightness.

Color

Darkens colors.

Lightens colors.

Tint

Enhances red and weakens

Enhances green and weakens

green.

red.

Picture Enhancement

Off

Low

Middle

High

Color Temperature

Cool

Normal

Warm

Black / White

Color Temp. Adjustment

Off

On

Amplitude

Red

Brighter scene is decreased in

Brighter scene is increased in

reddish color.

reddish color.

Green

Brighter scene is decreased in

Brighter scene is increased in

greenish color.

greenish color.

Blue

Brighter scene is decreased in

Brighter scene is increased in

bluish color.

bluish color.

Cut Off

Red

Dark scene is decreased in

Dark scene is increased in

reddish color.

reddish color.

Green

Dark scene is decreased in

Dark scene is increased in

greenish color.

greenish color.

Blue

Dark scene is decreased in

Dark scene is increased in

bluish color.

bluish color.

Reset

(off the function)

(waiting to reset)

Setup hint

Adjust for maximum visibility to suit the ambient brightness.

This can adjust further till [+40] by pressing and holding cursor button at [+31]. The color for [+32] to [+40] numbers will change from white to magenta. This special mode is better for dark scenes.

For brighter scene some parts of the picture might not be clear. We recommend to set at [+31].

"Panel Life" in the Function Menu should be set to Normal when Contrast setting is adjusted.

Adjust to taste.

Adjust to taste.

This is not available to adjust when receiving PAL/SECAM signal. In this case the character will be grayed out.

Adjust for most realistic skin color.

Sets the clarity of small details to the desired level.

Normally set to Normal.

Turn On when you wish to change color temperature depending on the user's preference.

Adjust color temperature depending on the user’s preference. These settings are independently stored in each of the 4 Color Temperature modes.

The original factory settings for the items of this Menu page can be restored by pressing the OK button.

20