Empire Comfort Systems VF24FP3-1 Wiring, Oiling Blower Motor, Vfs-Bkparts List, Index, Part

Wiring

The appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code ANSI/NFPA No. 70, if an external electrical source is utilized. This appliance is equipped with a three-prong [grounding] plug for your protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from this plug. For an ungrounded receptacle, an adapter, which has two prongs and a wire for grounding, can be purchased, plugged into the ungrounded receptacle and its wire connected to the receptacle mounting screw. With this wire completing the ground, the appliance cord plug can be plugged into the adapter and be electrically grounded.

CAUTION: Label all wires prior to disconnection when servic- ing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.

Oiling Blower Motor

The blower motor does not have oiling holes. Do not attempt to oil the blower motor.

WARNING:

Unplugging of blower accessory will not stop the heater from cycling. To turn off gas to the unvented heater: Push in gas control knob slightly and turn clockwise to “OFF.” Do not force.

		VFS-BK PARTS LIST
Index	Part	Description
No.	Number
1	11508	FAN CONTROL BRACKET
2	R-2503	FAN CONTROL
3	11301	BLOWER DIVERTER
4	R-2099	CORD SET
5	R-1410	STRAIN RELIEF BUSHING
6	M-147	GASKET
7	R-2804A	BLOWER ASSEMBLY
8	R-5804	WIRE HARNESS
9	R-1404	SNAP BUSHING
10	11507	BLOWER SHIELD - SIDE
11	11506	BLOWER SIDE -FRONT
12	R-2805	AUTO/OFF/ON SWITCH

20248-2-0806 Page 25