Figure 3
23.Position blower shield side beneath left flange on burner assembly.Align clearance hole on left flange of burner assembly with screw hole on blower shield side. Attach burner assembly to blower shield side with one (1) 10 x 1/2" screw. (See Figure 3 for not installed or Figure 4 for installed)
24.Remove 8 x 1/4" screw located on left, front of valve cover on
Figure 4
burner assembly. Insert blower shield front adjacent to blower motor and blower shield side. Align clearance hole on blower shield front with left, front screw hole on valve cover. Attach blower shield front to valve cover with 10 x 1/2" screw. (See Figure 3 for not installed or Figure 4 for installed)
25.For fireplace that is not installed, replace burner assembly into interior of fireplace.
26.Place inner casing in front of outer casing.
27.Insert inner casing assembly into outer casing.
Page 23 |
