OPTIONAL BLOWER INSTALLATION INSTRUCTIONS (cont.)
Figure 5
28.Place fan control bracket with wires on top of inner casing. Remove right, front 10 x 1/2" screw from top of inner casing. Attach fan control bracket to top of inner casing with 10 x 1/2" screw. Refer to Figure 5 for correct position of fan control bracket for 10,000 Btu input or 20,000 Btu input.
29.Attach inner casing to outer casing with six (6) 10 x 1/2" screws from Step 6. Tighten two (2) 10 x 1/2" screws at interior, top of inner casing that were loosened in Step 6.
30.Attach burner assembly to inner bottom with three (3) 10 x 1/2" screws from Step 5.
Figure 6
31.Attach rear log support to inner casing with three (3) 10 x 1/2" screws from Step 4.
32.Place and align blower diverter on top of inner casing. Attach deflector to top of inner casing with two (2) 10 x 1/2" screws. (See Figure 6)
33.Attach top louver with two (2) 8 x 1/2" Phillips screws from Step 3.
34.Attach screen front.
35.Raise bottom louver.
36.Installation of optional blower assembly is completed.
Page 24 |
|
