Hitachi PW1 user manual Display size selection diagram, AV1 AV2 AV3 RGB2 RGB1 AV4, Full

OPERATING INSTRUCTIONS

INPUT SELECT button

SIZE button

Input Switching

RGB/VIDEO buttons

VOL

RGB 1 RGB 2 MUTE VOL

AV1 AV2 AV3 AV4

AUTO PinP SIZE RECALL

MENU

OK

SIZE button

ENGLISH

･Input can be switched by pressing the AV1, AV2, AV3, AV4, RGB1 or RGB2 buttons of the remote control.

･Input can be switched in the sequence of AV1 → AV2 → AV3 → AV4 → RGB1 → RGB2 by pressing the INPUT

SELECT button of the monitor.

AV1 AV2 AV3

RGB2 RGB1 AV4

Size Switching

Each time the SIZE button of the remote control or the monitor is pressed, the screen display size will change in sequence and the status will be displayed at the bottom of the screen.

•During VIDEO signal input (AV1, AV2, AV3, AV4, RGB1 (set to [DVI-STB]) and RGB2 (set to [Component]))

4:3 Panoramic Zoom

Full Cinema

•The size will fix as Full mode and not change when receiving the component signal of 1080i/50, 1080i/60 or 720p/60.

Full

Display size selection diagram

When you want to	Set the display size	Input signal	Display screen	Remarks
Play a 4:3 image in a 16:9 screen faithfully.	4：3			Blanking occurs on both sides.
Play a 4:3 image in a 16:9 screen with the
height and width of the middle of the	Panoramic	(4:3 signal)
screen enlarged on equal scales and with
both sides appearing somewhat enlarged.
Play a 16:9 VISTA size image in the 4:3				• The 4:3 image is called a letterbox
	Zoom			image.
image faithfully reproduced on the 16:9
				• In some cases, some slight blanking may
screen.
		(Vista)		remain at the top and bottom.
Play a 21:9 Cinema size image in the 4:3	Cinema			In some cases, some slight blanking may
image expanded vertically on the 16:9
				remain at the top and bottom.
screen.		(Cinema)
Play a 4:3 image faithfully in a 16:9 screen	Full			* An image with an aspect ratio of 16:9
in the standard vertical size and				shrunk horizontally to 4:3 to display in a
horizontally squeezed.*				4:3 screen
		(Squeeze)

35