Hitachi CP-S845W To turn off the power, Plug&Play, Indicator lights up orange, Standby mode

Page 14

Basic operations (continued)

To turn off the power

3

2

1	1	STANDBY/ON	MUTE
	1
		FREEZE
STANDBY/ON		MAGNIFY VOLUME
		OFF
	INPUT
MUTE		POSITION ON	LASER

MENU

RESET

RESET	RIGHT
MENU ON	MOUSE ON
BLANK	TIMER
RGB	VIDEO
	INPUT

	1	Press the STANDBY/ON button, for 1 second.
		• The ON indicator blinks orange and the lamp turns off. (About 1 minute later), the fan stops and
		the indicator lights up orange.
		• Press the STANDBY/ON button for short time (less than 1 second), the projector do not set in
		standby mode.

	2	Turn the MAIN POWER switch of the projector off.[ : OFF]

	3	Install the lens cap.

	Caution		• To reduce temperature inside the projector, fan will rotate for about 1 minute after the lamp
			is turned off.

•Do not turn off the MAIN POWER switch during the lamp on because the lamp is damaged.

PLUG&PLAY

This projector complies with VESA DDC1/2B specifications. PLUG&PLAY is a system with computer, peripherals (including projectors), and operating system.

It works when the projector is connected to DDC (Display Data Channel) ready computer that is running an operating system software that incorporates plug & play functionality.

(Only RGB 1)

14

Image 14

Contents Outline FeaturesContents Operating GuideAbout Trademarks Before use Video signal cablesPower cord Instructions to UsersDo not use power supplies other Than that specified Do not look directly at the lens when Lamp is litDo not install this unit in an unstable place If any abnormality occursDo not stare directly into the laser aperture Class 2 Laser ProductWhen you are not going to use for a Long time CleaningHandle the power cord carefully Clean inside the unit at least once two yearsCleaning the lens Do not place this unit where it gets hotVolume Cleaning the cabinetContents of shipping box Names and functions of each partVideo input terminal Remote control sensor Main Power switchAC in socket RGB input terminalRemote control transmitter How to insert batteries Names and functions of each partHow to use foot adjusters InstallationExample of the projector and screen installation To project the picture On indicator will light up orangeBasic operations For 3 secondsStandby mode To turn off the powerIndicator lights up orange PLUG&PLAYFreeze Function Magnifying FunctionMemory function Adjustments and functionsTo return to the initial setting On-screen menus are displayed on the screenBar display items VOLUME, Bright etc SET UPHow to use the SET UP menu Numerical display items V POSIT, H Posit etcDuring AUTO-adjustment AUTO-adjustmentAUTO-adjustment Confirm Screen Adjustment Item Details of adjustmentImage The menu Image serves of the picture inversion MirrorConnection to the video signal terminals Connection to the RGB signal terminalExample of computer signal Resolution Standard Display Dots KHzComputer/signal Vertical Timing lines Initial set signalsComputer/signal Horizontal Timing µs Horizontal Timing µsConnection to the control signal terminal Control signal terminalSerial mouse PS/2 mouseADB Mac mouse Communication Control command tableControl command table RS232C cable OptionCommand data Procedure of default setting the Projector status Procedure of getting the Projector statusProcedure of setting the Projector status Example of command errorAC Inlet Computer Note type Example of system setupConnecting various equipment ComputerDesk typeDo not use with removed air filter Cleaning the air filterAir filter Filter cover Loosen a screw and remove the cover Remove the lamp coverLoosen two screws and pull the handle to remove Lamp Lamp Install the lamp cover and fix it using screwsReset the lamp time MalfunctioningOn-screen display Indicator displayMessage table ActionWhen you think something wrong Input terminal Input/Output Dimension diagramProduct name Liquid crystal projector Model name CP-S845W Terminal

Related manuals

Manual 34 pages 59.78 Kb