Hitachi CP-X430WA, CP-S420WA user manual No Signal Menu Description, Reduce Increase

Page 17

01CP-S420/CP-X430 03.9.2 0:08 PM ページ 16

OPERATIONS (continued)

No Signal Menu

The same adjustments and settings are available with the Image and Options menus when the MENU button is pressed during display of the “NO INPUT IS DETECTED ON ***” or “SYNC IS OUT OF RANGE ON ***” message while no signal is received.Select an item with the and buttons, and start or stop operation with the and buttons.

VOLUME

BLANK

START UP MIRROR MENU COLOR LANGUAGE

AUTO OFF

SYNC ON G

WHISPER

IR REMOTE

16

Table 8. No Signal Menu

Item

 

 

Description

 

 

 

Reduce

Increase

 

 

VOLUME

• When this function is used, audio input is automatically switched to video. The audio input can

be switched by moving the DISK PAD left and right during the display of the volume adjustment

 

 

bar. The volume adjustment bar is displayed by pressing VOLUME

/

button.

 

 

 

Select Blank Screen: Select the screen in case of the BLANK mode with the /

 

button. The selected one (MyScreen, ORIGINAL or one colors) is displayed when the

BLANK

BLANK mode is ON.

 

 

MyScreen is a mode that the customer-customized screen is displayed. This is the

 

blue screen at the factory setting. Refer to the description of MyScreen below.

 

ORIGINAL is a mode that the factory fixed screen is displayed.

 

When MyScreen or ORIGINAL is selected, the screen is going to the black after several minutes.

 

Select Start Up Screen: Select the screen in case of no signal input with the / button.

 

The selected one (MyScreen, ORIGINAL or TURN OFF) is displayed when no signal is input.

START UP

My Screen is a mode that the customer-customized screen is displayed. This is the

blue screen at the factory setting. Refer to the description of MyScreen below.

 

ORIGINAL is a mode that the factory fixed screen is displayed.

 

 

TURN OFF displays the blue screen.

 

 

 

• When MyScreen or ORIGINAL is selected, the screen is going to the black after several minutes.

 

 

 

 

MIRROR

Select Mirror Status: Select the mirror status with the

/

button.

MENU COLOR Select Menu Background Color: Select the color with the / button.

LANGUAGE Select Menu Display Language: Select the language with the / button.

AUTO OFF

Set AUTO OFF: Set 1~99 minutes with the / button. The system automatically enters the standby mode when a signal is not received for the set time.

Clear AUTO OFF: Select the STOP (0 min.) with the button. When the STOP is selected the system does not enter the standby mode even if no signal is received.

SYNC ON G Valid: Select the TURN ON with the button.

SYNC ON G Invalid: Select the TURN OFF with the button.

SYNC ON G

• May not be displayed correctly with some input signals when the SYNC ON G is valid. In such

 

cases, remove the signal connector so that no signal is received, set the SYNC ON G to invalid,

 

and reconnect the signal.

 

 

 

 

 

 

 

 

 

 

 

WHISPER

Set / Crear WHISPER Mode: Press the

/

button. When the WHISPER is

selected, the WHISPER mode is active. In the WHISPER mode, acoustic moise level

 

from the unit is reduced, and brightness level on screen is a little lower.

 

 

 

 

 

 

Select Remote Control Sensor: Select the sensors to activate along the menu with

 

the

/

button. Use this function if the remote does not work stably. The ambient

 

light may affect the remote.

 

 

IR REMOTE

 

 

VOLUME

 

 

 

 

 

 

 

BLANK

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

2

 

 

 

 

 

 

 

START UP

1

 

 

 

 

 

 

 

MIRROR

1 2 3

 

 

 

 

 

 

MENU COLOR

 

 

: active

 

 

 

 

 

AUTO OFF

 

 

 

 

 

 

 

LANGUAGE

 

 

: inactive

 

 

 

 

 

 

 

 

 

 

SYNC ON G

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WHISPER

 

 

 

 

 

 

 

 

 

 

 

 

IR REMOTE

 

 

 

 

 

ENGLISH-16

Image 17
Contents CP-S420WA/CP-X430WA/CP-X430W CP-S420/CP-X430Contents Before USE FeaturesContents of Package Component Video Before USEPart Names Refer to P.9 Operations TransmitterLoading the Batteries Installation of the Projector and Screen InstallationAngle Adjustment Installation ReferenceCabling InstallationCabling Plug & Play Power ConnectionExample of System Setup Power OFF Power onOperations StandbyBasic Operation Description OperationsBasic Operation Menu Display Start/Stop Press the Menu button Select Mode of P.IN P. Display Press the PinP buttonNormal menu Single menu Setup Menu Setup MenuAutomatic Adjustment at Video Input Select the Execute with Automatic Adjustment at RGB Input Select the Execute withInput Menu Input MenuImage Menu Description Image MenuStart UP MirrorSelect Menu Background Color Select with the / button Options MenuOptions Menu Reduce Increase No Signal MenuNo Signal Menu Description Lamp Life MaintenanceLamp Replacing the Lamp MaintenanceResetting the Lamp Timer Air Filter Other MaintenanceMessage Contents TroubleshootingOSD Message OSD MessageIndicators Message TroubleshootingIndicators Message IndicatorSymptom Possible cause Remedy SymptomSymptom Specifications SpecificationsWarranty and AFTER-SERVICE Technical Dimension DiagramSignal Connector Pin Assignment Technical Example of computer signalInitial set signals PS/2, ADB or Serial Mouse Connection to the Mouse ControlUSB Mouse PS/2 MouseSerial Mouse ADB MouseCommand data Communications settingRS-232C communication ProtocolChanging the projector settings Set command Requesting projector status Get commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandCRC Be EF BA D2 Be EF FD D3 Be EF Ntsc PAL Be EF CB D0 For the Customers in Canada Pour les utilisateurs au Canada Regulatory NoticesFCC Statement Warning Hitachi Europe S.r.1, Digital Media Group Hitachi Europe, Digital Media GroupHitachi Europe GmbH, Digital Media Group Hitachi Europe AB